MCR310-6 Datasheet, PDF (1/3 Pages) Kersemi Electronic Co., Ltd. – Silicon Controlled Rectifiers

MCR310 Series
Silicon Controlled Rectifiers
Reverse Blocking Triode Thyristors
Designed for industrial and consumer applications such as
temperature, light and speed control; process and remote controls;
warning systems; capacitive discharge circuits and MPU interface.
• Center Gate Geometry for Uniform Current Density
• All Diffused and Glass-Passivated Junctions for Parameter Uniformity
and Stability
• Small, Rugged, Thermowatt Construction for Low Thermal
Resistance, High Heat Dissipation and Durability
• Low Trigger Currents, 200 mA Maximum for Direct Driving from
Integrated Circuits
• Pb−Free Packages are Available
MAXIMUM RATINGS (T_J = 25°C unless otherwise noted.)
Rating
Symbol Value
Unit
Peak Repetitive Forward and Reverse
Blocking Voltage⁽¹⁾
(T_J = −40 to 110°C)
(1/2 Sine Wave, R_GK = 1 kΩ)
MCR310-6
MCR310-8
MCR310-10
V_DRM
or
V_RRM
Volts
400
600
800
On-State RMS Current (T_C = 75°C)
Peak Non-repetitive Surge Current
(1/2 Cycle, 60 Hz, T_J = −40 to 110°C)
Circuit Fusing (t = 8.3 ms)
I_T(RMS)
I_TSM
I²t
10
Amps
100
Amps
40
A²s
Peak Gate Voltage (t p 10 ms)
Peak Gate Current (t p 10 ms)
Peak Gate Power (t p 10 ms)
Average Gate Power
Operating Junction Temperature Range
Storage Temperature Range
Mounting Torque
V_GM
I_GM
P_GM
P_G(AV)
T_J
T_stg
−
±5
Volts
1
Amp
5
Watts
0.75
Watt
−40 to +110 °C
−40 to +150 °C
8
in.-lb.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction to Case
R_θJC
2.2
°C/W
Thermal Resistance, Junction to Ambient R_θJA
60
°C/W
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
(1) V_DRM and V_RRM for all types can be applied on a continuous basis. Ratings
apply for zero or negative gate voltage; however, positive gate voltage shall
not be applied concurrent with negative potential on the anode. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
www.kersemi.com
SCRs
10 AMPERES RMS
400 thru 800 VOLTS
G
A
C
MARKING
DIAGRAM
4
1
2
3
TO−220AB
CASE 221A
STYLE 3
MCR310−xG
AYWW
x
= 6, 8 or 10
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping
MCR310−6
MCR310−6G
TO220AB
TO220AB
(Pb−Free)
500/Box
500/Box
MCR310−8
TO220AB
500/Box
MCR310−8G
TO220AB
(Pb−Free)
500/Box
MCR310−10
TO220AB
500/Box
MCR310−10G
TO220AB
(Pb−Free)
500/Box
Preferred devices are recommended choices for future use
and best overall value.
1