MBRF850CT Datasheet, PDF (1/2 Pages) Kersemi Electronic Co., Ltd. – Isolation 8.0 AMPS. Schottky Barrier Rectifiers

MBRF830CT THRU MBRF8100CT
Features
Isolation 8.0 AMPS. Schottky Barrier Rectifiers
Voltage Range
30 to 100 Volts
Current
8.0 Amperes
ITO-220AB
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Guardring for overvoltage protection
High temperature soldering guaranteed:
260^oC/10 seconds,0.25”(6.35mm)from case
.134(3.4)DIA
.11 3 ( 3 .0 )D I A
.272(6.9)
.248(6.3)
. 11 2 ( 2 . 8 5 )
.100(2.55)
.606(15.5)
.583(14.8)
Mechanical Data
Cases: ITO-220AB molded plastic
Terminals: Leads solderable per MIL-STD-750, Method
2026
Polarity: As marked
Mounting position: Any
Mounting torque: 5 in. - lbs. max
Weight: 0.08 ounce, 2.24 grams
. 11 0 (2 . 8 )
.098(2.5)
.543(13.8)
.512(13.2)
PIN 1
PIN 3
PIN 2
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol MBRF MBRF MBR MBRF MBRF MBRF MBRF Units
830CT 835CT 840CT 845CT 850CT 860CT 8100CT
Maximum Recurrent Peak Reverse Voltage V_RRM 30 35 40 45 50 60 100 V
Maximum RMS Voltage
VRMS 21 24 28 31 35 42
70
V
Maximum DC Blocking Voltage
VDC
30 35
40 45
50 60
100
V
Maximum Average Forward Rectified Current
See Fig. 1
I(AV)
8
A
Per Leg
4
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
IFSM
150
A
Load (JEDEC method )
Maximum Instantaneous Forward Voltage at
(Note 1)
I_F= 4A, Tc=25^OC
VF
Maximum Instantaneous Reverse Current
at Rated DC Blocking Voltage @Tc=25℃
IR
@ Tc=125℃
0.55
0.70
0.80 V
5.0
mA
50
mA
Typical Thermal Resistance Per Leg (Note2) RθJC
6.0
℃/W
Operating Junction Temperature Range
TJ
-65 to +150
℃
Storage Temperature Range
TSTG
-65 to +150
℃
www.kersemi.com
- 114 -