MBRF20150CT Datasheet, PDF (1/2 Pages) KEC(Korea Electronics) – SWITCHING TYPE POWER SUPPLY APPLICATION CONVERTER & CHOPPER APPLICATION

MBRF2035CT - MBRF20150CT
Features
Plastic material used carries Underwriters Laboratory
Classifications 94V-0
Metal silicon junction, majority carrier conduction
Low power loss, high efficiency
High current capability, low forward voltage drop
High surge capability
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
Guardring for overvoltage protection
High temperature soldering guaranteed:
260^oC/10 seconds,0.25”(6.35mm)from case
Mechanical Data
Cases: ITO-220AB molded plastic
Terminals: Pure tin plated, lead free. solderable per
MIL-STD-750, Method 2026
Polarity: As marked
Mounting position: Any
Mounting torque: 5 in. - lbs. max
Weight: 0.08 ounce, 2.24 grams
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at TC=135^oC
Total device
Per Leg
Symbol
VRRM
VRMS
VDC
I(AV)
MBRF MBRF MBRF MBRF MBRF MBRF MBRF
2035 2045 2050 2060 2090 20100 20150
CT CT CT CT CT CT CT
35 45 50 60 90 100 150
24 31 35 42 63 70 105
35 45 50 60 90 100 150
20
10
Peak Repetitive Forward Current Per leg (Rated VR, Square
Wave, 20KHz) at Tc=135^oC
IFRM
20
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave
Superimposed on Rated Load (JEDEC method )
IFSM
Peak Repetitive Reverse Surge Current (Note 1)
IRRM
1.0
150
0.5
Maximum Instantaneous Forward Voltage at (Note 2)
IF=10A, Tc=25^oC
IF=10A, Tc=125^oC
IF=20A, Tc=25^oC
IF=20A, Tc=125^oC
Maximum Instantaneous Reverse Current @ Tc=25 ^oC
at Rated DC Blocking Voltage
@ Tc=125 ^oC
Voltage Rate of Change, (Rated VR)
Typical Junction Capacitance
-
VF
0.57
0.84
0.72
IR
0.1
15
dV/dt
Cj
400
0.80
0.70
0.95
0.85
0.85
0.75
0.95
0.85
0.95
0.85
1.05
0.95
0.1
10
5.0
10,000
310
RMS Isolation Voltage (MBRF Type Only) from Terminals to
Heatsink with t=1.0 Second, RH ≦30%
Typical Thermal Resistance Per Leg (Note 3)
Operating Junction Temperature Range
Storage Temperature Range
VISO
R_θJC
TJ
TSTG
4500 (Note 4)
3500 (Note 5)
1500 (Note 6)
1.5
3.5
-65 to +150
-65 to +175
Notes:
1. 2.0us Pulse Width, f=1.0 KHz
2. Pulse Test: 300us Pulse Width, 1% Duty Cycle
3. Thermal Resistance from Junction to Case Per Leg, with Heatsink Size (4”x6”x0.25”) Al-Plate
4. Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset.
5. Clip Mounting (on case), where leads do overlap heatsink.
6. Screw Mounting with 4-40 screw, where washer diameter is ≦4.9 mm (0.19”)
Units
V
V
V
A
A
A
A
V
mA
V/uS
pF
V
o_C/W
o_C
o_C
- 146 -
www.kersemi.com