MBR2050CT Datasheet, PDF (1/2 Pages) Sirectifier Semiconductors – Wide Temperature Range and High Tjm Schottky Barrier Rectifiers

MBR2035CT THRU MBR2060CT
TO-220AB
0.160 (4.06)
0.140 (3.56)
0.415 (10.54) MAX.
0.370 (9.40)
0.360 (9.14)
0.154 (3.91)
DIA.
0.148 (3.74)
0.113 (2.87)
0.103 (2.62)
0.145 (3.68)
0.135 (3.43)
0.410 (10.41)
0.390 (9.91)
PIN
1
23
0.635 (16.13)
0.625 (15.87)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.560 (14.22)
0.530 (13.46)
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
0.560 (14.22)
0.530 (13.46)
0.110 (2.79)
0.100 (2.54)
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Dual rectifier construction, positive center tap
♦ Metal silicon junction,
majority carrier conduction
♦ Low power loss,
high efficiency
♦ High current capability, low forward voltage drop
♦ High surge capability
♦ Guardring for overvoltage protection
♦ For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
♦ High temperature soldering guaranteed:
250°C/10 seconds, 0.25" (6.35mm) from case
0.105 (2.67)
0.095 (2.41)
0.037 (0.94)
0.027 (0.68)
0.105 (2.67)
0.095 (2.41)
0.022 (0.56)
0.014 (0.35)
MECHANICAL DATA
Case: JEDEC TO-220AB molded plastic
Terminals: Leads solderable per MIL-STD-750,
0.205 (5.20)
0.195 (4.95)
PIN 1
PIN 2
Method 2026
PIN 3
CASE
Polarity: As marked
Mounting Position: Any
Mounting Torque: 5 in. - lbs.max.
Dimensions in inches and (millimeters)
Weight: 0.08 ounce, 2.24 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Maximum repetitive peak reverse voltage
Maximum working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current
at TC=135°C
Peak repetitive forward current per leg at TC=135°C
(rated VR, sq. wave 2.0 KHZ)
Peak forward surge current 8.3ms single half sine-
wave superimposed on rated load (JEDEC Method)
Peak repetitive reverse surge current (NOTE 1)
Maximum instantaneous
forward voltage per leg at
(NOTE 2)
IF=10A, TC=25°C
IF=10A, TC=125°C
IF=20A, TC=25°C
IF=20A, TC=125°C
Maximum instantaneous reverse current at
rated DC blocking voltage per leg TC=25°C
TC=125°C
Voltage rate of change, (rated VR)
Typical thermal resistance per leg (NOTE 3)
Operating junction temperature range
Storage temperature range
SYMBOLS
VRRM
VRWM
VDC
I(AV)
MBR2035CT
35
35
35
MBR2045CT
45
45
45
MBR2050CT
50
50
50
MBR2060CT
60
60
60
UNITS
Volts
Volts
Volts
20.0
Amps
IFRM
20.0
Amps
IFSM
IRRM
VF
150.0
1.0
0.5
_
0.80
0.57
0.70
0.84
0.95
0.72
0.85
Amps
Amps
Volts
IR
dv/dt
RΘJC
TJ
TSTG
0.1
0.15
15.0
150.0
10,000
2.0
-65 to +150
-65 to +175
mA
V/µs
°C/W
°C
°C
NOTES:
(1) 2.0µs pulse width, f=1.0KHZ
(2) Pulse test: 300µs pulse width, 1% duty cycle
www.kersemi.com
4/98