MBR2045CT-E3 Datasheet, PDF (1/4 Pages) Kersemi Electronic Co., Ltd. – Dual Common-Cathode Schottky Rectifier

MBR(F,B)2035CT thru MBR(F,B)2060CT
Dual Common-Cathode Schottky Rectifier
TO-220AB
ITO-220AB
MBR20xxCT
PIN 1
PIN 2
PIN 3
CASE
3
2
1
TO-263AB
K
123
MBRF20xxCT
PIN 1
PIN 2
PIN 3
2
1
MBRB20xxCT
PIN 1
K
PIN 2
HEATSINK
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
V_F
T_J max.
10 A x 2
35 V to 60 V
150 A
0.57 V, 0.70 V
150 °C
FEATURES
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
• Solder dip 260 °C, 40 s (for TO-220AB and
ITO-220AB package)
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of
switching mode power supplies, freewheeling diodes,
dc-to-dc converters or polarity protection application.
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test, HE3 suffix for high reliability grade
(AEC Q101 qualified), meets JESD 201 class 2
whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (T_C = 25 °C unless otherwise noted)
PARAMETER
SYMBOL MBR2035CT MBR2045CT MBR2050CT MBR2060CT
Maximum repetitive peak reverse voltage
V_RRM
35
45
50
60
Working peak reverse voltage
V_RWM
35
45
50
60
Maximum DC blocking voltage
V_DC
35
45
50
60
Maximum average forward rectified total device
current at T_C = 135 °C
per diode
I_F(AV)
20
10
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load per diode
I_FSM
150
Peak repetitive reverse surge current per diode at
t_p = 2 µs, 1 kHz
Voltage rate of change (rated V_R)
Operating junction temperature range
Storage temperature range
Isolation voltage (ITO-220AB only)
from terminal to heatsink t = 1 min
I_RRM
dV/dt
T_J
T_STG
V_AC
1.0
0.5
10 000
- 65 to + 150
- 65 to + 175
1500
UNIT
V
V
V
A
A
A
V/µs
°C
°C
V
www.kersemi.com
1