R46 Datasheet, PDF (9/9 Pages) Kemet Corporation – METALLIZED POLYPROPYLENE FILM CAPACITOR

R.46+R
Capacitors with discharge resistor
X2 CLASS (IEC 60384-14) - MKP Series
metallized polyPROPYLENE film capacitor
SELF-HEALING PROPERTIES
PRODUCT CODE: R46
Not for use in series with the mains.
See www.kemet.com for more information.
Rated
Cap. (*)
275 Vac / 560 Vdc
Std dimensions
BHL p
Max
Ø d dv/dt at
390Vdc
(V/ µs)
Part Number
0.22 µF 7.0 16.0 26.5 22.5 0.8 200 R46KN 3220 - - 01 - x
0.33 µF 8.5 17.0 26.5 22.5 0.8 200 R46KN 3330 - - 01 - x
0.47 µF 10.0 18.5 26.5 22.5 0.8 200 R46KN 3470 - - 01 - x
0.68 µF 11.0 20.0 26.5 22.5 0.8 200 R46KN 3680 - - 01 - x
0.47 µF 11.0 20.0 32.0 27.5 0.8 150 R46KR 3470 - - 01 - x
0.68 µF 11.0 20.0 32.0 27.5 0.8 150 R46KR 3680 - - M1 - x
1.0 µF 13.0 22.0 32.0 27.5 0.8 150 R46KR 4100 - - M1 - x
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46KR 4150 - - M1 - x
Table 1
Standard
packaging style
REEL Ø500mm
Loose, short leads
Loose, long leads
Loose, long leads
Loose, insulated
rigid leads
Loose, insulated
flexible leads
Lead
length
(mm)
04 ⁺²
25 ^-1/+2
30 ⁺⁵
30 ⁺⁵
150 ^±5
Taping style
P₂
(mm)
Fig.
(No.)
Pitch
(mm)
Ordering
code
(Digit 10 to 11)
19.05
2
22.5/27.5
CK
00
50
40
51
52
2.2 µF 14.0 28.0 32.0 27.5 0.8
3.3 µF 18.0 33.0 32.0 27.5 0.8
4.7 µF 22.0 37.0 32.0 27.5 0.8
150 R46KR 4220 - - M1 - x
150 R46KR 4330 - - M2 - x
150 R46KR 4470 - - M1 - x
Product code system
The part number, comprising 15 digits, is formed as follows:
1.5 µF 11.0 22.0 41.5 37.5 1.0
2.2 µF 13.0 24.0 41.5 37.5 1.0
3.3 µF 16.0 28.5 41.5 37.5 1.0
100 R46KW 4150 - - M1 - x
100 R46KW 4220 - - M1 - x
100 R46KW 4330 - - M1 - x
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R4 6
-
-
4.7 µF 19.0 32.0 41.5 37.5 1.0
6.8 µF 20.0 40.0 41.5 37.5 1.0
10.0 µF 24.0 44.0 41.5 37.5 1.0
100 R46KW 4470 - - M1 - x
100 R46KW 4680 - - M2 - x
100 R46KW 5100 - - M1 - x
Digit 1 to 3 Series code.
Digit 4 a.c. rated voltage:
K = 275Vac; 3 = 300Vac
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
Value of discharge resistor (Table 2)
Digit 5 Pitch:
N = 22.5; R = 27.5; W = 37.5 mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of
Capacitance value and the 6th digit indicates
Rated
Cap. (*)
300 Vac / 630 Vdc
Std dimensions
BHL p
Max
Ø d dv/dt at
390Vdc
(V/ µs)
Part Number
0.22 µF 7.0 16.0 26.5 22.5 0.8 200 R463N 3220 - - 01 - x
0.33 µF 8.5 17.0 26.5 22.5 0.8 200 R463N 3330 - - 01 - x
0.47 µF 10.0 18.5 26.5 22.5 0.8 200 R463N 3470 - - 01 - x
0.68 µF 11.0 20.0 26.5 22.5 0.8 200 R463N 3680 - - 01 - x
0.47 µF 11.0 20.0 32.0 27.5 0.8 150 R463R 3470 - - 01 - x
0.68 µF 11.0 20.0 32.0 27.5 0.8 150 R463R 3680 - - M1 - x
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identifies the dimensions and electrical
characteristics.
Digit 13 Internal use
Digit 14 Capacitance tolerance:
K=±10%; M=±20%
Digit 15 Value of the discharge resistor (tolerance±10%)
according to the following table*:
1.0 µF 13.0 22.0 32.0 27.5 0.8
150 R463R 4100 - - M1 - x _{Table 2}
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R463R 4150 - - M1 - x
R code (x)
2.2 µF 14.0 28.0 32.0 27.5 0.8
150 R463R 4220 - - M1 - x
470 kΩ
E
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R463R 4330 - - M2 - x 680 kΩ
F
4.7 µF 22.0 37.0 32.0 27.5 0.8 150 R463R 4470 - - M1 - x
1 MΩ
G
1.5 µF 11.0 22.0 41.5 37.5 1.0
100 R463W 4150 - - M1 - x
1.2 MΩ
L
2.2 µF 13.0 24.0 41.5 37.5 1.0
3.3 µF 16.0 28.5 41.5 37.5 1.0
4.7 µF 19.0 32.0 41.5 37.5 1.0
6.8 µF 20.0 40.0 41.5 37.5 1.0
10.0 µF 24.0 44.0 41.5 37.5 1.0
100 R463W 4220 - - M1 - x
100 R463W 4330 - - M1 - x
100 R463W 4470 - - M1 - x
100 R463W 4680 - - M2 - x
100 R463W 5100 - - M1 - x
Rated voltage (3=300Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
Value of discharge resistor (Table 2)
1.5 MΩ
N
2.2 MΩ
P
3.3 MΩ
Q
4.7 MΩ
S
6.8 MΩ
T
10 MΩ
V
*Other resistors are avaible upon
request.
All dimensions are in mm
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.