R413I233000M1M Datasheet, PDF (5/17 Pages) Kemet Corporation – Metallized Polypropylene Film EMI Suppression Capacitors

Metallized Polypropylene Film EMI Suppression Capacitors
R41 Series, Class Y2, 300 VAC, 110ºC (Automotive Grade)
Performance Characteristics cont'd
Dissipation Factor (tanδ)
Test Voltage Between Terminals
Insulation Resistance
In DC Applications
≤ 0.3% (0.2%*) at 1kHz , +25°C ±5°C (* typical value)
The 100% screening factory test is carried out at 5,000 VDC/2,500 VAC. The voltage level is selected to meet the
requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not
permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures.
Measured at +25°C ±5°C, according to IEC 60384–2
Minimum Values Between Terminals
Voltage Charge
Voltage Charge Time
100 VDC
1 min
Recommended voltage ≤ 1,000 VDC
C ≤ 0.33 μF
≥ 1 • 10⁵ MΩ
( ≥ 5 • 10⁵ MΩ )*
C > 0.33 μF
≥ 30,000 MΩ • µF
( ≥ 150,000 MΩ • µF )*
* Typical value
Qualification
Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test
methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional
information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com.
Impedance Graph
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
F3100_R41_Y2_300 • 6/9/2016 5