C-1216 Datasheet, PDF (3/5 Pages) Kemet Corporation – High Current AC, Snap-on Type

Sensors – C/CT Series High Current AC, Snap-on Type
Temperature Charateristics
Operating Temperature
Range (°C)
-20 to 60
Storage Temperature Range
(°C)
-20 to 80
Table 1 – Ratings & Part Number Reference
Part Number
C/CT-1216
Rated
Current¹
(A)
120
Applicable
Current¹
(A)
0.1 – 120
Output
Voltage²
(mV)
1,000+/-20
1 _50Hz/60Hz
2 _{Measurement conditions from output voltage: f = 50 Hz, R = 60 Ω, lo = 50 A}
Current
Transformation Ratio
3,000
Output
Protection
(V)
7.5
Insulation
Resistance
500 VDC to 100 MΩ
Precautions
Before Using High Alternating Current Sensors, Snap-on Type
• Do NOT drop or apply any other mechanical stress.
• Preliminary study is required when heating by current conduction.
• Do NOT use the High Alternating Current Sensors, Snap-on Type, opened between secondary output terminals. Heat build-up in the
magnetic core may occur, resulting in damages to the parts by melting of the coil.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
SE0204_C_CT • 8/20/2015 3