T541D157M10AH6510 Datasheet, PDF (21/23 Pages) Kemet Corporation – T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 - 63 VDC

KEMET Organic Capacitor (KO-CAP^®) – High Reliability
T540/T541 COTS Polymer Electrolytic for High Reliability Applications, 2.5 – 63 VDC
Figure 5 – Reel Dimensions
Full Radius,
See Note
Access Hole at
Slot Location
(Ø 40 mm minimum)
A
D (See Note)
C
B (see Note)
(Arbor hole
diameter)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
W3 (Includes
flange distortion
at outer edge)
W2 (Measured at hub)
N
W1 (Measured at hub)
Table 5 – Reel Dimensions
Metric will govern
Tape Size
8 mm
12 mm
16 mm
Tape Size
8 mm
12 mm
16 mm
Constant Dimensions — Millimeters (Inches)
A
B Minimum
C
178±0.20
(7.008±0.008)
or
330±0.20
(13.000±0.008)
1.5
(0.059)
13.0+0.5/−0.2
(0.521+0.02/−0.008)
Variable Dimensions — Millimeters (Inches)
N Minimum
50
(1.969)
W₁
8.4+1.5/−0.0
(0.331+0.059/−0.0)
12.4+2.0/−0.0
(0.488+0.078/−0.0)
16.4+2.0/−0.0
(0.646+0.078/−0.0)
W₂ Maximum
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
D Minimum
20.2
(0.795)
W₃
Shall accommodate tape
width without interference
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
T2077_T540-541 • 11/29/2016 21