C0603C104K8RACTU Datasheet, PDF (2/25 Pages) Kemet Corporation – Non-polar device, minimizing installation concerns

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X7R Dielectric, 6.3 – 250 VDC (Commercial Grade)
Packaging C-Spec Ordering Options Table
Packaging Type¹
Bulk Bag / Unmarked
7" Reel / Unmarked
7" Reel / Marked
7" Reel / Unmarked / 2 mm pitch²
13" Reel / Unmarked / 2 mm pitch²
Packaging/Grade
Ordering Code (C-Spec)
Not required (Blank)
TU
TM
7081
7082
1 _{Default packaging is "Bulk Bag". An ordering code C-Spec is not required for "Bulk Bag" packaging.}
1 _{The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain capacitors that have}
not been laser marked. Please contact KEMET if you require a laser marked option. For more information see "Capacitor Marking".
2 _{The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size}
devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information".
Dimensions – Millimeters (Inches)
W
T
L
B
S
EIA Size
Code
0402
0603
0805
1206
Metric
Size
Code
L
Length
W
Width
T
Thickness
B
Bandwidth
S
Separation
Minimum
1005 1.00 (0.040) ±0.05 (0.002) 0.50 (0.020) ±0.05 (0.002)
0.30 (0.012) ±0.10 (0.004) 0.30 (0.012)
1608 1.60 (0.063) ±0.15 (0.006) 0.80 (0.032) ±0.15 (0.006)
0.35 (0.014) ±0.15 (0.006) 0.70 (0.028)
2012 2.00 (0.079) ±0.20 (0.008) 1.25 (0.049) ±0.20 (0.008)
0.50 (0.02) ±0.25 (0.010) 0.75 (0.030)
3216 3.20 (0.126) ±0.20 (0.008) 1.60 (0.063) ±0.20 (0.008)
0.50 (0.02) ±0.25 (0.010)
Mounting
Technique
Solder Reflow
Only
Solder Wave or
Solder Reflow
1210¹
1808
3225 3.20 (0.126) ±0.20 (0.008) 2.50 (0.098) ±0.20 (0.008) _{See Table 2} 0.50 (0.02) ±0.25 (0.010)
4520 4.70 (0.185) ±0.50 (0.020) 2.00 (0.079) ±0.20 (0.008) ^{for Thickness} 0.60 (0.024) ±0.35 (0.014)
1812
4532 4.50 (0.177) ±0.30 (0.012) 3.20 (0.126) ±0.30 (0.012)
1825
4564 4.50 (0.177) ±0.30 (0.012) 6.40 (0.252) ±0.40 (0.016)
0.60 (0.024) ±0.35 (0.014)
N/A
0.60 (0.024) ±0.35 (0.014)
Solder Reflow
Only
2220
5650 5.70 (0.224) ±0.40 (0.016) 5.00 (0.197) ±0.40 (0.016)
0.60 (0.024) ±0.35 (0.014)
2225
5664 5.60 (0.220) ±0.40 (0.016) 6.40 (0.248) ±0.40 (0.016)
0.60 (0.024) ±0.35 (0.014)
1 _{For capacitance values ≥ 4.7 µF add 0.02 (0.001) to the width tolerance dimension and 0.10 (0.004) to the length tolerance dimension.}
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
C1002_X7R_SMD • 1/20/2016 2