C0402C100J8GACTU Datasheet, PDF (2/21 Pages) Kemet Corporation – High ripple current capability

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10 – 250 VDC (Commercial Grade)
Packaging C-Spec Ordering Options Table
Packaging Type¹
Bulk Bag / Unmarked
7" Reel / Unmarked
7" Reel / Unmarked / 2 mm pitch²
13" Reel / Unmarked / 2 mm pitch²
Packaging/Grade
Ordering Code (C-Spec)
Not required (Blank)
TU
7081
7082
1 _{Default packaging is “Bulk Bag”. An ordering code C-Spec is not required for “Bulk Bag” packaging.}
1 _{The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain capacitors that have}
not been laser marked. The option to laser mark is not available on these devices. For more information see “Capacitor Marking”.
2 _{The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size}
devices. For more information regarding 2 mm pitch option see “Tape & Reel Packaging Information”.
Benefits cont'd
• Preferred capacitance solution at line frequencies and into the MHz range
• No capacitance change with respect to applied rated DC voltage
• Negligible capacitance change with respect to temperature from -55°C to +125°C
• No capacitance decay with time
• Non-polar device, minimizing installation concerns
• 100% pure matte tin-plated termination finish allowing for excellent solderability
• SnPb plated termination finish option available upon request (5% Pb minimum)
Applications
Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling, bypass,
filtering, transient voltage suppression, blocking and energy storage.
Qualification/Certification
Commercial Grade products are subject to internal qualification. Details regarding test methods and conditions are referenced in
Table 4, Performance and Reliability.
Environmental Compliance
Lead (Pb)-Free, RoHS, and REACH compliant without exemptions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
C1003_C0G • 10/5/2015 2