ALS36 Datasheet, PDF (2/8 Pages) Kemet Corporation – IEC 60384-4 Long Life Grade 40/85/56

ALS36 85°C
SPECIFICATION
Terminal styles A, R
DT
Terminal styles A (ø36mm only),
C, G, J, M, H & E
DT
Safety Vent
“+” SIGN
Z
S
T (measured
from deck
surface)
Insulating Disk
ØD
M
TD
V
TD
V
L
Fig. 1
Fig. 2
H
Lt
ALS36
ALS37
Clamp Mounting
Stud Mounting
Case Polarity
Due to the presence of electrolyte in the capacitor the aluminium can and stud mounting will essentially be at the same polarity as the
negative terminal. We recommend that the stud and can are insulated (see accessories for insulating nuts)..
Terminal options (preferred options shown in bold**)
Terminal
Style
Thread
Height - T
mm
±0.8
Diameter - DT
mm
±0.5
Height - T
inches
±0.031
Diameter - DT
inches
±0.019
Thread depth - TD
mm / (inches)
minimum
Drawing
A
M5
5.5
13
0.217
0.512
10 / (0.394")
Fig.1
A
M5
7.14
8
0.281
0.315
10 / (0.394")
Fig.2
C
M6
5.5
13
0.217
0.512
10 / (0.394")
Fig.2
E 1/4-28 UNF class 2B
6.35
17
0.250
0.670
11.8 / (0.465")
Fig.2
G
M6
6.35
17
0.250
0.670
11.8 / (0.465")
Fig.2
H** 10-32 UNF class 2B
7.14
8
0.281
0.315
10 / (0.394")
Fig.2
J
M6
3.17
17
0.125
0.670
8.8 / (0.346")
Fig.2
M
M5
7.14
8
0.281
0.315
10 / (0.394")
Fig.2
R (note 1)
M5
5.5
15
0.217
0.590
10 / (0.394")
Fig.1
Terminations
Aluminium inserts with 10-32 UNF Class 2B or M5 threads as standard, max. torque 2NM. 1/4-28 UNF Class 2B or M6 threaded
inserts have a max. torque 4NM. Max. torque for stud mounting M8:4NM and M12:8NM.
Terminal availability
Terminal
Style
Case Diameter mm (inches)
35 (1.375)
51 (2)
63.5 (2.5)
A¹
•
•
A²
•
C
•
E
•
G
•
H
•
•
•
J
•
M
•
•
•
R
•
76 (3)
•
•
•
•
•
•
•
•
* Dimensions Lt will change dependant on terminal style.