ALS30A153DA025 Datasheet, PDF (2/14 Pages) Kemet Corporation – Screw Terminal Aluminum Electrolytic Capacitors

Screw Terminal Aluminum Electrolytic Capacitors – ALS30/31 Series, +85°C
Performance Characteristics
Item
Capacitance Range
Rated Voltage
Operating Temperature
Storage Temperature Range
Capacitance Tolerance
Operational Lifetime
End of Life Requirement
Shelf Life
Leakage Current
Vibration Test Specifications
Standards
Performance Characteristics
100 – 680,000 µF
25 – 500 VDC
-40 to +85°C
-55 to +85°C
±20% at 100 Hz/+20°C
D (mm)
36
51
Rated Voltage and Ripple
Current at +85°C (hours)
11,000
18,000
Rated Voltage at +85°C (hours)
22,000
36,000
63.5, 66
19,000
38,000
77, 90
20,000
40,000
∆ C/C < ±10%, ESR < 2 x initial ESR value, IL < initial specified limit
2,000 hours at +85°C or 30,000 hours at +40°C 0 VDC
I = 0.003 CV or 6,000 (µA, whichever is smaller)
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Procedure
Case Length < 220 mm
Case Length ≥ 220 mm
0.75 mm displacement amplitude
or 10 g maximum acceleration.
Vibration applied for three 2-hour
sessions at 10 – 55 Hz
(Capacitor clamped by body).
0.35 mm displacement amplitude
or 5 g maximum acceleration.
Vibration applied for three 0.5
hour sessions at 10 – 55 Hz
(Capacitor clamped by body).
IEC 60384–4 long life grade 40/85/56
Requirements
No leakage of electrolyte
or other visible damage.
Deviations in capacitance and
tanδ from initial measurements
must not exceed: ∆ C/C < 5%
Surge Voltage
Test Condition
Voltage (VDC)
25
40
63
100
200
250
350
400
450
500
≤ 30s Surge followed by a no load
period of 330s, 1,000 cycles at +85°C
28.75
46
72.5
115
230
288
385
440
495
550
≤ 500 ms surge, 100 cycles
at 20°C, occurring randomly
throughout the life of the capacitor
350
400
500
520
550
600
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
A4031_ALS30_31 • 8/30/2016 2