T497 Datasheet, PDF (1/4 Pages) Kemet Corporation – HIGH GRADE COTS TANTALUM CHIPS

Product Bulletin
KEMET HIGH GRADE COTS TANTALUM CHIPS - T497 SERIES
FEATURES
Pb-free/RoHS Compliant: Available
100% Accelerated Steady State Aging
Self-healing Mechanism
Various Termination Options
Surge Current Testing Available
100% Thermal Shock
Capacitance: 0.10 to 150 μF
Voltage: 4V to 25V
Low Profile Case Sizes
Customer Defined Performance Options
For custom low leakage and ESR solutions, contact your local KEMET Sales Representative.
OUTLINE DRAWING
DIMENSIONS - INCHES (Millimeters)
KEMET
Size
Code
A
B
C
D
E
F
G
H
X
L
W
H
P
Length
Width
Height
+0.25 (.010)
W₂
± .38 (.015) ± 0.38 (.015) ± 0.38 (.015) - 0.13 (.005)
2.54 (.100) 1.27 (.050)
1.27 (.050
0.76 (.030)
1.27 ± 0.13 (.050 ± .005)
3.81 (.150) 1.27 (.050)
1.27 (.050)
0.76 (.030)
1.27 ± 0.13 (.050 ± .005)
5.08 (.200) 1.27 (.050)
1.27 (.050)
0.76 (.030)
1.27 ± 0.13 (.050 ± .005)
3.81 (.150) 2.54 (.100)
1.27 (.050)
0.76 (.030)
2.41 + .13, -.25 (.095 + .005, -.010)
5.08 (.200) 2.54 (.100)
1.27 (.050)
0.76 (.030)
2.41 + .13, -.25 (.095 + .005, -.010)
5.59 (.220) 3.43 (.135)
1.78 (.070)
0.76 (.030)
3.30 ± 0.13 (.130 ± .005)
6.73 (.265) 2.79 (.110)
2.79 (.110)
1.27 (.050)
2.67 ± 0.13 (.105 ± .005)
7.24 (.285) 3.81 (.150)
2.79 (.110)
1.27 (.050)
3.68 + 0.13, -0.51 (.145 + .005 - .020)
6.93 (.273) 5.41 (.213)
2.74 (.108)
1.19 (.047)
3.05 ± 0.13 (.120 ± .005)
KEMET ORDERING INFORMATION
T 497 D 156 M 006 A T 6XXX
H₂
Minimum
0.76 (.030)
0.76 (.030)
0.76 (.030)
0.76 (.030)
0.76 (.030)
1.02 (.040)
1.52 (.060)
1.52 (.060)
1.22 (.048)
Tantalum
Series
T497 High Grade
Case Size
A,B,C,D,E,F,G,H,X
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Capacitance Tolerances
M = ±20%; K = ±10%
Voltage
As shown
Note: 006 = 6.3V
F3271C 05/06
Performance Options
6110 Standard Features
6115 Surge = None, 100% X-Ray
6210 Surge = 10 Cycles, +25ºC
6215 Surge = 10 Cycles, +25ºC, 100% X-Ray
6410 Surge = 10 Cycles, -55ºC and +85ºC
6415 Surge = 10 Cycles, -55ºC and +85ºC,
100% X-Ray
Lead Material
T = 100% Tin
B = Gold
H = SnPb (5% Pb minimum)
Failure Rate
A = Not Applicable
B = 0.1%/1000 Hrs.
C = 0.01%/1000 Hrs.