T496X227M010ATE500 Datasheet, PDF (1/18 Pages) Kemet Corporation – Tantalum Surface Mount Capacitors – Fused

Tantalum Surface Mount Capacitors – Fused
T496 Series Fused MnO₂
Overview
The T496 Series of tantalum chip capacitors offers a "fail
safe" design. The built-in fuse element offers excellent
protection from damaging short circuit conditions in
applications where damaging high fault currents exist.
Protection from costly circuit damage due to reversed
installation is offered with this device. This series is
classified as MSL (Moisture Sensitivity Level) 1 under J STD
020: unlimited floor life time at ≤ 30°C/85% RH.
Benefits
• Meets or exceeds EIA Standard 535BAAC
• Patented fuse assembly
• Optional gold-plated terminations
• Built-in fuse protects against short circuit mode
• 100% surge current test on C, D, and X sizes
• Halogen-free epoxy
• Capacitance values of 0.15 μF to 330 μF
• Tolerances of ±10% and ±20%
• Voltage rating of 4 – 50 VDC
• Fuse activation, 25°C: within 1 second at fault currents
of 4 amps and higher
• Continuous current capability: 0.75 amps
• Post actuation resistance, 25°C: 10 MΩ, minimum
• Test tabs on side of case bypass the capacitor element to
allow direct testing of the fuse assembly
• RoHS Compliant and lead-free terminations
• Operating temperature range of −55°C to +125°C
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include decoupling and filtering in computing and telecommunications end applications, such as high-
end servers requiring built-in fuse capability.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
One world. One KEMET
T2010_T496 • 9/22/2016 1