T496C106M016ATE2K0 Datasheet, PDF (1/19 Pages) Kemet Corporation – Tantalum Surface Mount Capacitors – Fused T496 Series Fused MnO2

Tantalum Surface Mount Capacitors – Fused
T496 Series Fused MnO₂
Overview
The T496 Series of tantalum chip capacitors offers a "fail safe" to reversed installation is offered with this device. This series is
design. The built-in fuse element offers excellent protection from classified as MSL (Mositure Sensitivity Level) 1 under J STD 020:
damaging short circuit conditions in applications where damaging unlimited floor life time at ≤30°C/85% RH.
high fault currents exist. Protection from costly circuit damage due
Benefits
• Meets or exceeds EIA Standard 535BAAC
• Approved to DSCC drawing 04053
• Patented fuse assembly
• Optional gold-plated terminations
• Built-in fuse protects against short circuit mode
• 100% surge current test on C, D, and X sizes
• Halogen-free epoxy
• Capacitance values of 0.15 μF to 330 μF
• Tolerances of ±10% and ±20%
• Voltage rating of 4 – 50 VDC
• Fuse activation, 25˚C: within 1 second at fault currents
of 4 amps and higher
• Continuous current capability: 0.75 amps
• Post actuation resistance, 25˚C: 10 MΩ, minimum
• Test tabs on side of case bypass the capacitor element to allow
direct testing of the fuse assembly
• RoHS Compliant and lead-free terminations
• Operating temperature range of -55˚C to +125˚C
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include decoupling and filtering in computing and telecommunications end applications, such as high-end servers
requiring built-in fuse capability.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
One world. One KEMET
T2010_T496 • 9/24/2014 1