T356J156K035AT Datasheet, PDF (1/13 Pages) Kemet Corporation – PERFORMANCE CHARACTERISTICS

TANTALUM DIPPED / RADIAL — POLAR
PERFORMANCE CHARACTERISTICS
• CAPACITANCE/VOLTAGE RANGE:
T35X/T39X: 0.1-680µF, 3-50 Volts.
T36X: 0.1-330µF, 6-50 Volts.
• CAPACITANCE TOLERANCE: Available in stan-
dard EIA nominal values with ±20% and ±10%
standard.
• DISSIPATION FACTOR: Maximum DF limits are
shown in corresponding series part number list-
ings. See Application Notes Section, page 76 for
additional information.
• DC LEAKAGE CURRENT: Maximum leakage val-
ues at 25° are shown in part number listings,
pages 63-65, 67, 68 and 70. See Application
Notes Section, pages 76 & 77 for additional infor-
mation.
• RATED VOLTAGE; WORKING VOLTAGE; SURGE
VOLTAGE; REVERSE VOLTAGE: See Application
Notes Section, pages 76 & 77 for description.
• IMPEDANCE and ESR: See Application Notes
Section, page 77 & 78 for description. Reference
ESR values are shown in table below.
Commercial T35X/T36X/T39X ESR (OHMS) at 100 kHz @ +25°C
(The ESR values provided below are for reference only. No warranty, as
stated on page 3 and reincorporated here, is made as to the accuracy
of these values for any particular T35X, T36X, T39X Series product.)
Cap. 6 10 16 20 25 35 50
µF Volt Volt Volt Volt Volt Volt Volt
0.10
26.0 26.0
0.15
21.0 21.0
0.22
17.0 17.0
0.33
15.0 15.0
0.47
13.0 13.0
0.68
10.0 10.0
1.00
10.0 10.0 8.0 8.0
1.50
10.0 9.0 8.0 6.0 5.0
2.20
13.0 8.0 7.0 6.0 5.0 3.5
3.30 13.0 10.0 6.0 5.5 5.0 4.0 3.0
4.70 10.0 8.0 5.0 4.5 4.0 3.0 2.5
6.80 8.0 6.0 4.0 3.6 3.1 2.5 2.0
10.0 6.0 5.0 3.2 2.9 2.5 2.0 1.6
15.0 5.0 3.7 2.5 2.3 2.0 1.6 1.2
22.0 3.7 2.7 2.0 1.8 1.5 1.3 1.0
33.0 3.0 2.1 1.6 1.4 1.2 1.0
47.0 2.0 1.7 1.3 1.2 1.0 0.8
68.0 1.8 1.3 1.0 0.9 0.8
100.0 1.6 1.0 0.8 0.6
150.0 0.9 0.8 0.6
220.0 0.9 0.6
330.0 0.7
• AC RIPPLE VOLTAGE: Permissible AC ripple volt-
age is related to equivalent series resistance
(ESR) and power dissipation capability. Maximum
power dissipation for each case size is listed in
Table below. For additional description see page
78.
Case
Size
Power Dissipation
(max.) @ 25°C (watts)
T35X, A
.040
T39X B
.050
C
.060
D
.065
E
.070
F
.080
G
.090
H
.100
J
.110
K
.120
L
.130
M
.140
T36X A
.050
B
.075
C
.090
D
.135
Maximum Power Dissipation Capability @ 25°C
• ENVIRONMENTAL CONSIDERATIONS:
A. Shock Test: MIL-STD-202, Method 213.
B. Thermal Shock, MIL-STD-202, Method 107,
Condition A.
C. Moisture Resistance: MIL-STD-202,
Method 106.
D. Solderability: MIL-STD-202, Method 208.
For additional Environmental Test Information
see pages 80, 81 and 82.
• LEAD MATERIAL: Effective June 30, 2005 the
T35x, T368 and T39x Series will be available, as an
option, with 100% Matte Tin (RoHS compliant) lead wire
or Sn/Pb lead wire. Please see page 63 for part number
ordering information. The T363 and T369 lead mater-
ial will remain Sn/Pb solder coated steel core with a
copper ply per MIL-STD-127 and at this time will not
be available with a 100% Sn option.
• LEAD TAPE AND REEL: Reeling per specification
RS-468. See pages 72 - 74 for additional information.
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 [phone]
61