T110A105K050AT7200 Datasheet, PDF (1/26 Pages) Kemet Corporation – T110 Series Axial MIL-PRF-39003 Polar Type and T212 (CSR13 Style)

Tantalum Through-Hole Capacitors – Hermetically Sealed
T110 Series Axial MIL–PRF–39003 Polar Type and
T212 (CSR13 Style)
Overview
The KEMET standard hermetically sealed T110 Series is
targeted for use in high humidity environments. These
capacitors are ruggedly built, designed for miniaturized
circuitry, and are especially well-suited for coupling, bypass,
filtering and RC timing circuits. The T110 Series exhibits
excellent stability as well as extremely low DC leakage
current, dissipation factor, and ESR/impedance over a wide
temperature and frequency range. Available in standard
EIA capacitance values from 0.0047 µF to 330 µF in ±20%,
±10%, and ±5% tolerances, the T110 Series is now offered in
working voltages of 6 VDC to 125 VDC and low ESR limits.
Higher CV values in comparable case sizes are available in
the KEMET T410 Series.
Benefits
• Taped and reeled per EIA Specification RS–296
• Marking per MIL–STD–1285
• Qualified to MIL–PRF–39003 (CSR13 Style)
• Failure rate options: Graded – B, C, D, and G
Exponential – M, P, R, and S*
• Capacitance values of 0.0047 μF to 330 μF
• Tolerances of ±5%, ±10% and ±20%
• Voltage rating of 6 – 125 VDC
• Operating temperature range of −55°C to +125°C
• Case sizes: A, B, C, D
*Failure rates apply to military products only
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include coupling, bypass, filtering and RC timing circuits in miniaturized circuitry.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
One world. One KEMET
T2031_T110_AXIAL_T212 • 9/20/2016 1