R73EI2470AA00H Datasheet, PDF (1/20 Pages) Kemet Corporation – R73 Series Polypropylene Film/Foil, Radial (Automotive Grade)

Polypropylene Pulse/High Frequency Capacitors
R73 Series Polypropylene Film/Foil, Radial
(Automotive Grade)
Overview
The R73 Series is constructed of polypropylene film and metal foil
or metallized film and metal foil with radial leads of tinned wire.
The radial leads are electrically welded to the metal layer on the
ends of the capacitor winding. The capacitor is encapsulated in a
self-extinguishing solvent resistant plastic case with thermosetting
resin material meeting the UL 94V–0 requirements. Two different
winding constructions are used depending on voltage parameters.
Please see the Performance Characteristics for more information.
Automotive grade devices are available (up to lead spacing 22.5
mm) and meet the demanding Automotive Electronics Council's
AEC–Q200 qualification requirements.
Applications
Typical applications include deflection circuits in televisions
(flyback tuning), switching spikes suppression in switched mode
power supply (SMPS), snubber and silicon-controlled rectifier
(SCR) commutation circuits, and switching circuits in electronic
ballasts, as well as applications with high voltage and very
high current. Not suitable for across-the-line application (see
Suppressor Capacitors).
Benefits
• Voltage range: 100 – 2,000 VDC
• Capacitance range: 100 pF – 2.2 µF
• Lead Spacing: 15 – 37.5 mm
• Capacitance tolerance: ±2.5% (for 2-section construction only)
±5%, ±10%
• Climatic category: 55/105/56 IEC 60068-1
• Operating temperature range of −55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Tape and reel packaging in accordance with IEC 60286–2
• Self-healing
• Automotive (AEC–Q200) grades available up to lead spacing
22.5mm
Part Number System
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
R73
Series
Polypropylene Film/
Foil
E
Rated Voltage (VDC)
E = 100
G = 160
I = 250
M = 400
P = 630
Q = 1000
R = 1250
T = 1600
U = 2000
I
Lead Spacing (mm)
I = 15.0
N = 22.5
R = 27.5
W = 37.5
2470
Capacitance Code
(pF)
The last three digits
represent significant
figures. The first digit
specifies the total
number of zeros to be
added.
AA
Packaging
See Ordering
Options Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
00
Internal Use
00, 10, 30, 40
(Standard)
H
Capacitance
Tolerance
H = ±2.5%
(for 2-section
construction only)
J = ±5%
K = ±10%
One world. One KEMET
F3037_R73 • 1/20/2016 1