PME271Y Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – EMI suppressor, class Y2, metallized paper

PME271Y
• EMI suppressor, class Y2, metallized paper
• 0.001 – 0.15 µF, 250 VAC up to +100 °C, 300 VAC up to +115 °C
RoHS
Compliant
• The highest possible safety regarding
active and passive flammability.
• Self-extinguishing UL 94V-0
encapsulation material.
• Excellent self-healing properties.
Ensures long life even when subjected to
frequent overvoltages.
• Good resistance to ionisation due to
impregnated dielectric.
• High dU/dt capability.
• Small dimensions.
• Safety approvals for worldwide use.
• The capacitors meet the most stringent
IEC humidity class, 56 days.
• The impregnated paper ensures
excellent stability giving outstanding
reliability properties, especially in
applications having continuous
operation.
L
B
typical applications
Construction
The capacitors are intended for use as
interference suppressors in Y2 (line-to-
earth) applications.
Multi-layer metallized paper. Encapsulated
and impregnated in self-extinguishing
material meeting the requirements of UL
94V-0.
L
p ± 0.5
B
∅d
Technical data
PME271Y PME271YA-E
Rated voltage VAC, 50/60Hz 250
300
Capacitance range µF
0.001–0.1 0.001–0.15
Temperature range °C
–40/+100
–40/+115
Climatic category IEC
40/100/56/B 40/115/56/B
Capacitance tolerance
Approvals
Dissipation factor tanδ
Insulation resistance
In DC applications
Resonance frequency
Test voltage between
terminals
± 10% for C > 0.1 µF, code K
± 20% for C ≤ 0.1 µF, code M
ENEC, UL, CSA
≤ 1.3 % at 1 kHz
C ≤ 0.33 µF ≥ 12000 MΩ
Measured at 500 VDC after 60 s, +23°C
Recommended voltage: ≤ 1000 VDC
Tabulated self-resonance frequencies f₀ refer to 5 mm
lead lengths.
The 100% screening factory test is carried out at 3000
VDC. The voltage level is selected to meet the
requirements in applicable equipment standards. All
electrical characteristics are checked after the test.
p ± 0.5
d _d=₌00..68_00..68ffoo_ffrr_oorrpp_pp==₌₌ 11₁₁05_05....₂₂22_{,,2200.3.3, 2, 22.25.5}
∅d
1.0_1.0fo_fr_orp_p=₌ 2₂5_5..₄4
l =l =stastnadnadardrd: 3300++55//-00 mmmm(c(codoedRe3R03) 0)
d = 0o.p6tiofonr p = 1sh0o.2rt leads, tolerance +0/-1 mm
op^0(st^.i^t8o^an^nfodr1^ap:^rd=s⁶h¹o^m5r^.m2t^,l^,e^2ca^0o.d^d3es^, ,^2R2t⁰o^.56le⁾ rance +0/-1 mm
^{1O.t0h eforrlepa=}(^ds²t^lea⁵ⁿn^.4gd^tha^srd^on6^rem^qm^ue,^sc^t.ode R06)
_{l = stan dard} O₃th₀e₊r₅l_/e_-0ad_mmlen_(cg_ot_dh_es_Ro₃n₀₎request
dB _{oApttteionunation short leads, tolerance +0/-1 mm}
70_{op(st0it.o4a7nµFd2a:rd360 mmmm, ciondseulRa0te6d) solid leads,
60} Oth er leaodrldenegritnhgs ocnordeeq:uerespt. lace R30
w^0.0i⁴t⁷h^µFR300PS in std P/N
50
0.0047 µF
dB
40 Attenuation
70
0.47 µF
30
60
0.047 µF
20
50
0.0047 µF
10
40
f
0
30 1
3 5 10
30
100 200 MHz
S₂u₀ ppression versus frequency. Typical values.
10
0
1
3 5 10
f
30
100 200 MHz
Suppression versus frequency. Typical values.
Environmental test data
Vibration
IEC 60068-2-6, Test Fc

3 directions at 2 hour each,
No visible damage, No open or short circuit
10 – 500 Hz at 0.75 mm or 98 m/s²
Bump
IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s²
No visible damage, No open or short circuit
Solderability
IEC 60068-2-20, Test Ta Solder globule method
Wetting time for d ≤ 0.8 < 1 s

for d > 0.8 < 1.5 s
Active flammability EN/IEC 60384-14:2005
Passive flammability EN/IEC 60384-14:2005
Humidity
IEC 60068-2-3, Test Ca +40°C and 90 – 95% R.H.
56 days
Evox Rifa Leaded Film Capacitors
67