PME271E510M Datasheet, PDF (1/2 Pages) Kemet Corporation – EMI suppressor, class X1, metallized paper

PME271E
• EMI suppressor, class X1, metallized paper
• 0.01 – 0.22 µF, 300 VAC, +110 °C
RoHS
Compliant
• The highest possible safety regarding
active and passive flammability.
• Self-extinguishing UL 94V-0
encapsulation material.
• Excellent self-healing properties.
Ensures long life even when subjected to
frequent overvoltages.
• Good resistance to ionisation due to
impregnated dielectric.
• High dU/dt capability.
• Small dimensions.
• Safety approvals for worldwide use.
• The capacitors meet the most stringent
IEC humidity class, 56 days.
typical applications
Construction
• The impregnated paper ensures
excellent stability giving outstanding
reliability properties, especially in
applications having continuous
operation.
L
B
The capacitors are intended for use as
interference suppressors in X1 (across-the-
line) applications.
Multi-layer metallized paper. Encapsulated
and impregnated in self-extinguishing
material meeting the requirements of UL
94V-0.
Technical data
p ±^L 0.5
B
∅d
Rated voltage VAC, 50/60Hz 300
Capacitance range µF
0.01–0.22
Temperature range °C
–40/+110
Climatic category IEC
40/110/56/B
Capacitance tolerance
± 10% for C > 0.1 µF, code K.
± 20% for C ≤ 0.1 µF, code M
Approvals
ENEC, UL
Dissipation factor tanδ
≤ 1.3 % at 1 kHz
Insulation resistance
C ≤ 0.33 µF ≥ 12000 MΩ
C > 0.33 µF ≥ 4000 s
Measured at 500 VDC after 60 s, +23°C
In DC applications
Recommended voltage: ≤ 630 VDC
Resonance frequency
Tabulated self-resonance frequencies f₀ refer to 5 mm
lead lengths.
Test voltage between
The 100% screening factory test is carried out at
2150 VDC. The voltage level is selected to meet the
requirements in applicable equipment standards. All
electrical characteristics are checked after the test.
d _d=₌0.6_0.f₆o_fr_orp_p=₌1^p₁0₀^±._.2₂^0.5
0.8_0.f₈o_fr_orp_p=₌1₁5₅._.2_2,, ₂2₀0_.3.3_, ,₂₂2_.2₅.5
∅d
1.0_1.f₀o_fr_orp_p=₌2₂5₅._.4₄
l =^{l =}sta^sn^tadⁿa^dr^ad^rd: 30³⁰+⁺5⁵/^/-^-0^{0 m}m^mm^(c(c^oo^dede^R3R⁰3⁾ 0)
option short leads, tolerance +0/-1 mm
^{d =o p(O001ts...itt680oha nenfffooord1rrraleppp:rads(===d}sh⁶t^112loaem055nnr^...m224tgd^,tl,hae^2csra^0odd^{.od3ns6e, ,2rR}m^et2o0q.m^56ule)e,r^sact.nocdee
+0/-1
R06)
mm
Other lead lengths on request
l^d=^B s_Ata_tten_nd_ua_atr_iod_n 30 +5/-0 mm (code R30)
70_opo_t0p_io.4t₇i_no_µn_{F2: 30}sh_mor_mt le_inad_ss_u,_lato_tl_edran_sc_oe_lid+0_l/_e-1_adm_sm_,
60 ^{(sta ndard}o⁶rd^me^mrin^{, c}g^oc^deod^Re⁰:⁶r⁾eplace R30
^{Oth er lea}w^d0.i^0lt^4eh^7nµgFR^th3^s0^o0ⁿP^rS^eqin^ues^st^td^. P/N
50
0.0047 µF
d4B0
Attenuation
370
0.47 µF
260
0.047 µF
150
40
1
0.0047 µF
3 5 10
30
f
100 200 MHz
S³u⁰ ppression versus frequency. Typical values.
20
10
0
1
3 5 10
f
30
100 200 MHz
Suppression versus frequency. Typical values.
Environmental test data
Vibration
IEC 60068-2-6, Test Fc 3 directions at 2 hour each,
No visible damage, No open or short circuit

10 – 500 Hz at 0.75 mm or 98 m/s²
Bump
IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s²
No visible damage, No open or short circuit
Solderability
IEC 60068-2-20, Test Ta Solder globule method
Wetting time for d ≤ 0.8 < 1 s

for d > 0.8 < 1.5 s
Active flammability EN/IEC 60384-14:2005
Passive flammability EN/IEC 60384-14:2005
Humidity
IEC 60068-2-3, Test Ca +40°C and 90 – 95% R.H.
56 days
Evox Rifa Leaded Film Capacitors
63