PHE426 Datasheet, PDF (1/7 Pages) List of Unclassifed Manufacturers – Single metallized film pulse capacitor, polypropylene dielectric

PHE426
• Single metallized film pulse capacitor, polypropylene dielectric
• According to IEC 60384-16, grade 1.1
L
RoHS
Compliant
B
typical applications
Construction
Pulse operation in SMPS, TV, monitor,
electrical ballast and other high frequency
applications demanding stable operation.
Polypropylene film capacitor with vacuum
evaporated aluminum electrodes. Radial
leads of tinned wire are electrically welded
to the contact metal layer on the ends of
the capacitor winding. Encapsulation in
self-extinguishing material meeting the
requirements of UL 94V-0.
Two different winding constructions are
used, depending on voltage and lead
spacing. They are specified in the article
table.
1 section construction
2 section construction
H
0.5
p
∅d
b
l
p
d std I max I b
5.0 ± 0.4 0.5 5^-1 20 ± 0.4
7.5 ± 0.4 0.6 5^-1 20 ± 0.4
10.0 ± 0.4 0.6 5^-1 30 ± 0.4
15.0 ± 0.4 0.8 6^-1 30 ± 0.4
22.5 ± 0.4 0.8 6^-1 30 ± 0.4
27.5 ± 0.4 0.8 6^-1 30 ± 0.4
37.5 ± 0.5 1.0 6^-1 30 ± 0.7
Rated voltage U_R, VDC
Rated voltage U_R, VAC
Capacitance range, µF
Capacitance values
Capacitance tolerance
Category temperature range
Rated temperature
Voltage derating
Climatic category
Passive flammability
Maximum pulse steepness:
Temperature coefficient
Self-inductance
Dissipation factor tanδ
Insulation resistance
technical data
100 250
300
400
450 630
1000 1600 2000
63
160
160
220
220 250
250
650
700
0.001 0.001 0.033 0.001 0.1
0.001 0.0027 0.0047 0.001
–0.22 –27
–18
–10
–3.9 –5.6
–3.3
–0.047 –0.027
In accordance with IEC E12 series
±5%, other tolerances on request
–55 ... +105°C
+85°C

The rated voltage is decreased with 1.3%/°C between +85°C and +105°C.
IEC 60068-1, 55/105/56/B
Category B according to IEC 60065
dU/dt according to article table
For peak to peak voltages lower than rated voltage (U_PP < U_R), the specified dU/dt can be
multiplied by the factor U_R/U_PP.
–200 (+50, –100) ppm/°C (at 1 kHz)
Approximately 6 nH/cm for the total length of capacitor winding and the leads.
Maximum values at +23°C
C ≤ 0.1 µF 0.1µF < C ≤ 1.0 µF C > 1.0 µF
1 kHz 0.05%
10 kHz –
100 kHz 0.25%
0.05%
0.10%
–
0.10%
–
Measured at +23°C, 100 VDC 60 s for U_R < 500 VDC and at 500 VDC for U_R ≥ 500 VDC

Between terminals:
C ≤ 0.33 µF: ≥ 100 000 MΩ
C > 0.33 µF: ≥ 30 000 s
Between terminals and case:
≥ 100 000 MΩ.