FLLD3150APVI2 Datasheet, PDF (1/2 Pages) Kemet Corporation – High-current 3-phase EMC Filter

FLLD3 … PV High-current 3-phase EMC Filter
Overview
The three phase filter series is intended to be used in energy conversion inverter systems (e.g. photo voltaic and wind power), between the
inverter and the line or in motor drive systems. The filters are optimized for geometry and power loss.
As the Capacitance Company, KEMET is only using high quality capacitors in its filter series.
Technical specifications
Rated voltage
Rated current
Leakage current
Rated temperature
Temperature range
Climate category
Voltage test
520 VAC
150 – 2500 A
< 5 mA *)
50°C
-40°C to +100°C
40/100/21
P -> P 2250 VDC
P -> E 3000 VDC
The FLLE2…PV-series is designed according
to IEC/EN 60939 and UL 1283.
*) Maximum leakage current under normal operating conditions.
If two phases are interrupted, leakage current can be much higher.
Filter
FLLD3150APVI2
Rated current
@ 50°C
(A)
150
Power loss
@ 25°C/DC
(W)
25
Weight
(kg)
6
FLLD3180APVI2
180
35
6
FLLD3250APVI2
250
45
7
FLLD3320APVI1
320
15
10
FLLD3400APVI1
400
25
10
L1
L1
FLLD3600APVI1
600
40
11
L2
L2
FLLD3800APVI1
800
50
17
L3
L3
FLLD31K0APV1
1000
75
17
FLLD31K6APVI1
1600
130
26
FLLD32K5APVI1
2500
250
55
PE
PE
Typical insertion loss
Sym
dB 100
80
60
40
20
0
0.01 0.1
1
Asym
10 100
MHz
150 to 250 A
Sym
dB 100
80
60
40
20
0
0.01 0.1
1
Asym
10 100
MHz
320 to 1000 A
Sym
dB 100
80
60
40
20
0
0.01 0.1
1
Asym
10 100
MHz
1600 and 2500 A
KEMET EMC Filters
1