C4A Datasheet, PDF (1/3 Pages) Kemet Corporation – Self-Healing

General characteristics
- Self-Healing
- Low losses
- High ripple current
- High contact reliability
- Suitable for high frequency applications
L
B
Ød
P^±0.4
C4A
MKP Series
BOX CAPACITORS
PCB APPLICATIONS
L
B
P^±0.4
Ød
P1^±0.4
Wire
Diameter
13^th digit code
0.8 mm
20 AWG
1
1.2 mm
16 AWG
3
TECHNICAL DATA
General technical data
Application class (DIN 40040)
Temperature range (Case)
Max permissible ambient temperature
Capacitance tolerance code (15^th digit )
Peak non-repetitive max current
Test voltage terminal to terminal U_TT
Test voltage terminal to case U_TC
Dissipation factor (tgδ)
Permissible relative humidity
IEC climatic category
Capacitance deviation in the operating temperature
range of –40 to +85 °C
Change of capacitance versus operating time
Case components
Terminals
Installation
Life Expectancy
Failure quota
These two leads
joined together
VDE 0560 - IEC61071 - EN61071
GPD / LS
-40 to + 85 °C
+70 °C
J = ± 5 % ; K = ± 10%
I_PKR x 1.5
2 Un for 10 seconds
3kV - 50Hz for 60 seconds
≤ 5 x 10^-4 at 1 kHz and 20 °C
Annual average ≤ 95% on 30 days / year, continuously 100% on
other days occasionally 100%. Dewing not admissible
40 / 85 / 56 according to IEC 68-1
±1.5% max on capacitance value measured at +20 °C
-3% after 30.000 hours at U_RMS or after 100.000 hours at Un
Solvent resistant plastic case with epoxy resin sealing.
Flame retardant execution (UL class 94 V0).
Tinned copper 2 or 4 wires (See figure on top)
Whatever Position
≥ 30.000 hours at U_RMS; ≥ 100.000 hours at Un
300 / 10⁹ components hour