C1210C154KCRACTU Datasheet, PDF (1/23 Pages) Kemet Corporation – High Voltage X7R Dielectric, 500 - 3,000 VDC(Commercial Grade)

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
High Voltage X7R Dielectric, 500 – 3,000 VDC
(Commercial Grade)
Overview
KEMET’s High Voltage surface mount MLCCs in X7R
Dielectric feature a 125°C maximum operating temperature
and are considered “temperature stable.” The Electronics
Industries Alliance (EIA) characterizes X7R dielectric as a
Class II material. Components of this classification are fixed,
ceramic dielectric capacitors suited for bypass and decoupling
applications or for frequency discriminating circuits where Q
and stability of capacitance characteristics are not critical. X7R
exhibits a predictable change in capacitance with respect to
time and voltage and boasts a minimal change in capacitance
with reference to ambient temperature. Capacitance change is
limited to ±15% from −55°C to +125°C.
are widely used in industries related to automotive (hybrid),
telecommunications, medical, military, aerospace, semiconductors
and test/diagnostic equipment.
In addition to Commercial Grade, Automotive Grade devices
are available which meet the demanding Automotive Electronics
Council's AEC-Q200 qualification requirements.
Available in a variety of case sizes and industry leading CV
values (capacitance/voltage), these devices exhibit low leakage
current and low ESR at high frequencies. Conventional uses
include both snubbers and filters in applications such as
switching power supplies and lighting ballasts. Their exceptional
performance at high frequencies has made high voltage MLCC's
the preferred dielectric choice of design engineers worldwide.
In addition to their use in power supplies, these capacitors
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
C 1210
C
Ceramic
Case Size
(L" x W")
Specification/
Series
0603 C = Standard
0805
1206
1210
1808
1812
1825
2220
2225
154
Capacitance
Code (pF)
Two significant
digits + number
of zeros.
K
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
C
Rated Voltage
(VDC)
C = 500
B = 630
D = 1,000
F = 1,500
G = 2,000
Z = 2,500
H = 3,000
1 _{Additional termination finish options may be available. Contact KEMET for details.}
R
Dielectric
R = X7R
A
Failure Rate/
Design
A = N/A
C
Termination
Finish¹
C = 100%
Matte Sn
L = SnPb (5%
Pb minimum)
TU
Packaging/Grade
(C-Spec)
See "Packaging
C-Spec Ordering
Options Table"
below
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
One world. One KEMET
C1010_X7R_HV_SMD • 2/29/2016 1