C1206X106K4RAC3316 Datasheet, PDF (1/7 Pages) Kemet Corporation – Flexible Termination System (FT-CAP), X7R Dielectric, 6.3-100 VDC, VW 80808 Specification

Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs)
Flexible Termination System (FT-CAP), X7R Dielectric,
6.3 – 100 VDC, VW 80808 Specification
Overview
KEMET’s Flexible Termination (FT-CAP) multilayer ceramic
capacitor in X7R dielectric incorporates a unique, flexible
termination system that is integrated with KEMET’s standard
termination materials. A conductive silver epoxy is utilized
between the base metal and nickel barrier layers of KEMET’s
standard termination system in order to establish pliability
while maintaining terminal strength, solderability and electrical
performance. This technology was developed in order to
address the primary failure mode of MLCCs– flex cracks, which
are typically the result of excessive tensile and shear stresses
produced during board flexure and thermal cycling. Flexible
termination technology inhibits the transfer of board stress to the
rigid ceramic body, therefore mitigating flex cracks which can
result in low IR or short circuit failures.
Although this technology does not eliminate the potential
for mechanical damage that may propagate during extreme
environmental and handling conditions, it does provide superior
flex performance over standard termination systems.
Combined with the stability of an X7R dielectric, these flex-robust
devices are RoHS Compliant, offer a 5 mm minimum of flex-bend
and exhibit a predictable change in capacitance with respect to
time and voltage. Capacitance change with reference to ambient
temperature is limited to ±15% from -55°C to +125°C.
In addition of these devices meeting the Automotive Electronics
Council's AEC–Q200 qualification requirements, the VW80808
(VW/AUDI) Specification approval is also part of this robust
product offering
Ordering Information
C 1206
X
106
K
4
Ceramic
Case Size
(L" x W")
Specification/
Series
Capacitance
Code (pF)
Capacitance Rated Voltage
Tolerance
(VDC)
0603 X = Flexible Two significant J = ±5%
0805 Termination
digits +
K = ±10%
1206
number of M = ±20%
1210
zeros
9 = 6.3
8 = 10
4 = 16
3 = 25
5 = 50
1 = 100
1 _{Additional reeling or packaging options may be available. Contact KEMET for details.}
R
Dielectric
R = X7R
A
Failure Rate/
Design
A = N/A
C
Termination
Finish
C = 100%
Matte Sn
3316
Packaging/Grade
(C-Spec)¹
3316 = 7" Reel
Unmarked
3317 = 13" Reel
Unmarked
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
One world. One KEMET
Special_VW/AUDI • 1/26/2016 1