C1206C104J3JACTU Datasheet, PDF (1/20 Pages) Kemet Corporation – Surface Mount Multilayer Ceramic Chip Capacitors

Preliminary Data Sheet
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
U2J Dielectric, 10 - 50 VDC (Commercial Grade)
Overview
KEMET’s U2J dielectric features a maximum operating
temperature of 125°C and is considered stable. The Electronics
Industries Alliance (EIA) characterizes U2J dielectric as a Class
I material. Components of this classification are temperature
compensating and are suited for resonant circuit applications
or those where Q and stability of capacitance characteristics
are required. U2J is an extremely stable dielectric material that
exhibits a negligible shift in capacitance with respect to voltage
and boasts a predictable and linear change in capacitance
with reference to ambient temperature with no aging effect. In
addition, U2J dielectric extends the available capacitance range
of Class I MLCCs to achieve values previously only available
using Class II dielectric materials like X7R, X5R, Y5V and Z5U.
U2J is not sensitive to DC Bias as compared to Class II
dielectric materials and retains over 99% of nominal capacitance
at full rated voltage.
Capacitance change is limited to −750 ± 120 ppm /°C from
−55°C to +125°C. These devices are Lead-free, RoHS and
REACH compliant without exception and are capable of
withstanding multiple passes through a Lead-free solder reflow
profile.
Benefits
• Operating temperature range of −55°C to +125°C
• Lead (Pb)-free, RoHS and REACH compliant
• EIA 0402, 0603, 0805, 1206, 1210 and 1812 case sizes
• DC voltage ratings of 10 V, 16 V, 25 V and 50 V
• Capacitance offerings ranging from 1.0 nF up to 470 nF
• Available capacitance tolerances of ±1%, ±2%, ±5%, ±10%
and ±20%
• Low noise solution similar to C0G
• Low dissipation factor DF < 0.1%
• Low ESR & ESL
• High thermal stability
• High ripple current capability
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Ordering Information
C 1206
C
104
Ceramic
Case Size
(L" x W")
Specification/
Series¹
Capacitance
Code (pF)
0402 C = Standard Two significant
0603
digits +
0805
number of zeros.
1206
1210
1812
J
3
J
A
Capacitance
Tolerance²
Rated Voltage
(VDC)
Dielectric
Failure Rate/
Design
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
8 = 10
4 = 16
3 = 25
5 = 50
J = U2J A = N/A
C
Termination Finish³
C = 100% Matte Sn
TU
Packaging/Grade
(C-Spec)
See “Packaging
C-Spec
Ordering
Options Table”
below
1 _{Flexible termination option is available. Please see FT-CAP product bulletin C1062_C0G_FT-CAP_SMD}
2 _{Additional capacitance tolerance offerings may be available. Contact KEMET for details.}
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
One world. One KEMET
C1086_U2J • 6/7/2016 1