C0805Y103K5RAC Datasheet, PDF (1/3 Pages) Kemet Corporation – Fail-Safe Floating Electrode MLCC with Flexible Termination

Product Bulletin
Fail-Safe Floating Electrode MLCC with Flexible Termination
FF-CAP / X7R Dielectric
Floating (Cascading) Electrode Internal Design
Outline Drawing
W
TT
LL
B
S
Electrodes
Tin Plate
Nickel Plate
Conductive Metallization ^{Silver Epoxy}
Product Description
The FF-CAP incorporates two existing KEMET technologies; Floating Electrode (cascading electrode
design) and Flexible Termination. The floating electrode component of these capacitors yields improved
voltage and ESD performance over standard designs, and also mitigates the risk of low IR or short circuit
failures associated with mechanical flex cracks. The flexible termination component incorporates a meas-
ure of flexibility to the capacitor, shifting flex stress away from the ceramic body and into the termination
area.
The combination of these technologies ensures an increased measure of protection from board flex,
offering up to 5mm of flex-bend capability. This provides for an enhanced level of mechanical flex crack pro-
tection for low to mid capacitance part types.
Dimensions – Millimeters (Inches)
EIA Size Metric Size
Code
Code
L
Length
W
Width
B
Bandwidth
S
Separation
0603
1608 1.8 (.071) ± 0.15 (.006) 0.8 (.032) ± 0.15 (.006) 0.35 (.014) ± 0.15 (.006) 0.70 (.028)
0805
2012 2.2 (.087) ± 0.20 (.008) 1.25 (.049) ± 0.20 (.008) 0.05 (.02) ± 0.25 (.010) 0.75 (.030)
1206
3216 3.4 (.134) ± 0.20 (.008) 1.6 (.063) ± 0.20 (.008) 0.50 (.02) ± .25 (.010)
N/A
1210
3225 3.4 (.134) ± 0.20 (.008) 2.5 (.098) ± 0.20 (.008) 0.50 (.02) ± .25 (.010)
N/A
Refer to standard thickness dimensions and table located in the F3102 SMT catalog on pages 73, 74, and 77.
F3282 8/07