C062H105K5R5GA7303 Datasheet, PDF (1/13 Pages) Kemet Corporation – Radial Through-Hole Multilayer Ceramic Capacitors

Radial Through-Hole Multilayer Ceramic Capacitors
High Temperature 200°C, Radial, Molded, X7R Dielectric,
50 – 200 VDC (Industrial Grade)
Overview
KEMET’s High Temperature 200ºC epoxy molded radial
through-hole ceramic capacitors in X7R dielectric feature
a robust and proprietary dielectric system that offers
industry-leading performance in extreme high pressure
and high temperature environments up to 200°C. These
capacitors are designed specifically to withstand the
severe shock and vibration conditions associated with
deep-well and horizontal drilling activities and are well
suited for use in aerospace engine compartments,
geophysical probes, hybrid and electric automotive motor
drives and defense applications.
These epoxy molded radial through-hole ceramic capacitors
in X7R dielectric achieve high dielectric breakdown,
low leakage current and minimal parametric shift while
maintaining predictable performance characteristics with
respect to variations in temperature, applied voltage and
time. These devices are suited for bypass and decoupling
applications or for frequency discriminating circuits where Q
and stability of capacitance characteristics are not critical.
Capacitance change is limited to ±15% from −55°C to +125°C
and +15%/−55% at +200°C.
As high temperature electronic module complexity
increases, the size reduction of components becomes
more and more critical. These devices are significantly
smaller by volume than most competitor radial molded
capacitors, allowing for downsizing and replacement
opportunities of larger high temperature precious metal
electrode (PME) and base metal electrode (BME) dielectric
system devices. They feature gold-plated lead wires
for temperature resistance and an epoxy molded case for
environmental protection and mechanical durability.
Ordering Information
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
C 062
H
105
K
5
R
5
G
A
7303
Ceramic
Style/
Size
Specification/
Series
Capacitance
Code (pF)
052
H=
Two significant digits
062 High Temp and number of zeros
200ºC Use 9 for 1.0 – 9.9 pF
ex. 2.2 pF = 229
Capacitance
Tolerance¹
J = ±5%
K = ±10%
M = ±20%
Rated
Voltage
(VDC)
5 = 50
1 = 100
2 = 200
Dielectric Design
R=
5=
X7R Multilayer
Lead
Finish²
G=
Gold (Au)
Failure
Rate
Packaging
C-Spec³
A = Blank = Bulk Bag
N/A T250 = 250 pcs/
12" Reel
T500 = 500 pcs/
12" Reel
T1K0 = 1,000 pcs/
12" Reel
7301 = Full Reel Qty/
12" Reel
7303 = Full Reel Qty/
12" Reel
7061 = Bulk Tray
1 _{Additional capacitance tolerance offerings may be available. Contact KEMET for details.}
2 _{Wire lead materials and finishes: Alternative lead materials and finishes may be available. Contact KEMET for details.}
3 _{Default packaging for this product series is "Bulk Bag". KEMET will assume "Bulk Bag" packaging is required when the 15th thru 18th character positions are}
left blank.
3 _{C-Spec 7301 can only be used when ordering 052 style/size.}
3 _{C-Spec 7303 can only be used when ordering 062 style/size.}
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com C1074_HT_X7R_RADIAL_MOLDED • 8/10/2016 1