C0504A109F2GAC Datasheet, PDF (1/7 Pages) Kemet Corporation – CAPACITOR OUTLINE DRAWINGS

CERAMIC MOLDED/RADIAL - HIGH RELIABILITY
GR900 SERIES (BP DIELECTRIC)
CAPACITOR OUTLINE DRAWINGS
Size
Code
0805
1005
1206
1210
1805
1808
1812
1825
2225
DIMENSIONS — MILLIMETERS (INCHES)
L
Length
W
Width
T
Thickness
Max.
2.03 (.080) ± 0.38 (.015)
2.56 (.100) ± 0.38 (.015)
3.07 (.120) ± 0.38 (.015)
3.07 (.120) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015)
4.57 (.180) ± 0.38 (.015)
5.59 (.220) ± 0.38 (.015)
1.27 (.050) ± 0.38 (.015)
1.27 (.050) ± 0.38 (.015)
1.52 (.060) ± 0.38 (.015)
2.56 (.100) ± 0.38 (.015)
1.27 (.050) ± 0.38 (.015)
2.03 (.080) ± 0.38 (.015)
3.18 (.125) ± 0.38 (.015)
6.35 (.250) ± 0.38 (.015)
6.35 (.250) ± 0.38 (.015)
1.4 (.055)
1.5 (.059)
1.6 (.065)
1.6 (.065)
1.4 (.055)
1.6 (.065)
2.03 (.080)
2.03 (.080)
2.03 (.080)
ORDERING INFORMATION
C 0805 A 103 K 5 X A C
CERAMIC
SIZE CODE
See table above
SPECIFICATION
A — KEMET GR900 (CHIPS)
CAPACITANCE CODE
Expressed in Picofarads (pF)
First two digit-significant figures.
Third digit-number of zeros. (Use 9 for 1.0 thru 9.9 pF.
Example: 2.2 pF — 229).
CAPACITANCE TOLERANCE
M —± 20% G — ±2% (G(BP) Temperature Characteristic Only)
K —± 10% F — ±1% (G(BP) Temperature Characteristic Only)
J — ±5% *D — ±0.5 pF (G(BP) Temperature Characteristic Only)
*C — ±0.25 pF (G(BP) Temperature Characteristic Only)
*These tolerances available only for 1.0 through 10 pF capacitors.
END METALLIZATION
C—Tin-Coated, Final (SolderGuard II)
H—Solder-Coated, Final (SolderGuard I)
FAILURE RATE LEVEL
(%/1,000 HOURS)
A—Standard—Not applicable
TEMPERATURE CHARACTERISTIC
Designated by Capacitance Change over
Temperature Range
G—BP (±30 PPM/C )
X—BX (±15%, +15%, -25% with bias.)
VOLTAGE
1—100
2—200
5—50
MARKING
Capacitors shall be legibly laser marked in contrasting color with
the KEMET trademark and 2-digit capacitance symbol.
17
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com