C0402C101J5GACTU Datasheet, PDF (1/18 Pages) Kemet Corporation – C0G Dielectric, 10 – 200 VDC (Commercial Grade)

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
C0G Dielectric, 10 – 200 VDC (Commercial Grade)
Overview
KEMET’s C0G dielectric features a 125°C maximum operating
temperature and is considered “stable.” The Electronics
Components, Assemblies & Materials Association (EIA)
characterizes C0G dielectric as a Class I material. Components
of this classification are temperature compensating and are
suited for resonant circuit applications or those where Q and
stability of capacitance characteristics are required. C0G exhibits
no change in capacitance with respect to time and voltage and
boasts a negligible change in capacitance with reference to
ambient temperature. Capacitance change is limited to ±30
ppm/ºC from -55°C to +125°C.
Benefits
• -55°C to +125°C operating temperature range
• RoHS Compliant
• EIA 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825,
2220, and 2225 case sizes
• DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V, and 200 V
• Capacitance offerings ranging from 0.5 pF up to 0.47 μF
• Available capacitance tolerances of ±0.10 pF, ±0.25 pF, ±0.5
pF, ±1%, ±2%, ±5%, ±10%, and ±20%
• No piezoelectric noise
• Extremely low ESR and ESL
• High thermal stability
• High ripple current capability
• Preferred capacitance solution at line frequencies and into the
MHz range
Ordering Information
• No capacitance change with respect to applied rated DC voltage
• Negligible capacitance change with respect to temperature from
-55°C to +125°C
• No capacitance decay with time
• Non-polar device, minimizing installation concerns
• 100% pure matte tin-plated termination finish allowing for
excellent solderability
• SnPb plated termination finish option available upon request (5%
minimum)
C 1206
C
104
J
3
G
A
C
TU
Ceramic
Case Size
(L" x W")
Specification/
Series¹
Capacitance
Code (pF)
0201 C = Standard 2 significant digits +
0402
number of zeros.
0603
Use 9 for 1.0 – 9.9 pF
0805
Use 8 for 0.5 – .99 pF
1206
e.g., 2.2 pF = 229
1210
e.g., 0.5 pF = 508
1808
1812
1825
2220
2225
Capacitance
Tolerance²
B = ±0.10 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
Voltage
8 = 10 V
4 = 16 V
3 = 25 V
5 = 50 V
1 = 100 V
2 = 200 V
Dielectric
Failure Rate/
Design
Termination Finish³
Packaging/Grade
(C-Spec)⁴
G = C0G A = N/A
C = 100% Matte Sn Blank = Bulk
TU = 7" Reel
Unmarked
1 _{Flexible termination option is available. Please see FT-CAP product bulletin C1062_C0G_FT-CAP_SMD}
2 _{Additional capacitance tolerance offerings may be available. Contact KEMET for details.}
3 _{Additional termination finish options may be available. Contact KEMET for details.}
4 _{Additional reeling or packaging options may be available. Contact KEMET for details.}
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
One world. One KEMET
C1003_C0G • 11/20/2013 1