ACMD-7403_15 Datasheet, PDF (9/11 Pages) AVAGO TECHNOLOGIES LIMITED – Miniature UMTS Band II / PCS Duplexer

STENCIL
BOUNDARY
0.20
0.10
2.80
0.10
2.80
Stencil Opening ID
Qty Width (mm) Length (mm)
I/O pad areas
3
0.35
0.35
All other openings
9
0.50
0.50
Notes:
1. Chamfer or radius all corners 0.05 mm min
2. Stencil openings aligned to Boundary rectangle or center lines
3. Non-I/O pad stencil openings aligned to 0.52 x 0.55 grid
(i.e., spacing between openings: 0.2 vertical, 0.5 horizontal)
Figure 23. Recommended Solder Stencil
Figure 24. Solder Stencil Overlaid on ACMD-7403 Bottom Metal Pattern
Figure 25. SMD Tape Packing