English
Language : 

KIA431_12 Datasheet, PDF (1/8 Pages) KEC(Korea Electronics) – BIPOLAR LINEAR INTEGRATED CIRCUIT
SEMICONDUCTOR
TECHNICAL DATA
KIA431 Series
BIPOLAR LINEAR INTEGRATED CIRCUIT
PROGRAMMABLE PRECISION REFERENCES
The KIA431 Series integrated circuits are three-terminal programmable shunt regulator diodes.
These monolithic IC voltage reference operate as a low temperature coefficient zener which is programmable from Vref
to 36 volts with two external resistors. These devices exhibit a wide operating current range of 1.0 to 100mA with a
typical dynamic impedance of 0.22ʃ.The characteristics of these references make them excellent replacements for
zener diodes in many applications such as digital voltmeters, power supplies, and op amp circuitry. The 2.5 volt
reference makes it convenient to obtain a stable reference from 5.0 volt logic supplies, and since the KIA431 Series
operates as a shunt regulator, it can be used as either a positive or negative voltage reference.
FEATURES
hDivice Code Name :KIA431 + Vref Code + Package Code+Pin Configuration Code
ITEM
Vref Code
Package Code
Pin Configuration Code (SOT-23 Only)
Code Tolerance (%) Code
Package
Code
Type
Blank
‚2.2
Blank
TO-92
Blank
A
A
‚1.0
F
SOT-89
2
B
KIA431
B
‚0.5
S
TSM
T
TSV
M
SOT-23
hLow Dynamic Output Impedance : 0.22ʃ(Typ.).
hSink Current Capability of 1.0 to 100mA.
hEquivalent Full-Range Temperature Coefficient of 50ppm/ (Typ.).
hTemperature Compensated for Operation Over Full Rated Operating Temperature Range.
hLow Output Noise Voltage.
LINE UP
Type No. Operating Voltage(V) Package Marking
KIA431
KIA431A
TO-92
KIA431B
KIA431F
3A
KIA431AF
SOT-89
3B
KIA431BF
3C
KIA431T
43C
KIA431AT
TSV
43A
KIA431BT
43B
2.5~36
KIA431S
43C
KIA431AS
TSM
43A
KIA431BS
43B
KIA431M
KIA431AM
KIA431BM
43C
SOT-23
43A
(A-Type)
43B
KIA431M2
KIA431AM2
KIA431BM2
43F
SOT-23
43D
(B-Type)
43E
* KIA431BT
(Tolerance : 0.5% , TSV package) : Under Development
PIN CONFIGURATION (SOT-23)
3
1
2
3
TOP
VIEW
2
1
A-Type : 1. Cathode 2. Ref 3. Anode
B-Type : 1. Ref 2. Cathode 3. Anode
2012. 3. 20
Revision No : 16
1/8