DFR1A Datasheet, PDF (3/3 Pages) Shenzhen Luguang Electronic Technology Co., Ltd – Surface Mount Fast Recovery Rectifiers

Package Outline
DFR1A~DFR1M
Surface Mount Fast Recovery Rectifiers
Notice
● Product is intended for use in general electronics applications.
● Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure
mechanisms.
● The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general
derating methods you design a circuit with a device.
I_F(AV) : We recommend that the worst case current be no greater than 80% .
I_FSM : This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which the general
during the lifespan of the device.
T_J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at
a T_J of below 125°C.
● TRR is registered trademark of Rising-sun Technology. Rising-sun Technology reserves the right to make changes to any product in this
specification to improve reliability,functional characteristics,or design without notice.
● Rising-sun Technology does not assure any liability arising out of the applications or any product described in this specification.
● Rising-sun Technology advises customers to obtain the latest version of the device information before placing orders to verify that the
required information is current.
http://www.trr-jx.com