SMCJ5.0 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Surface Mount TRANSZORB Transient Voltage Suppressors

SMCJ5.0 THRU SMCJ188A
TRANSIENT VOLTAGE SUPPRESSORS
Features
● For surface mounted applications in
order to optimize board space
● Low profile space
● Glass passivated chip
● Low inductance
● Excellent clamping capability
● Very fast response time
● Typical I_D less than 1µA at V_WM
● 1500W peak pulse power capability
with a 10/1000 µs waveform
● Component in accordance to
RoHS 2002/95/1 and WEEE 2002/96/EC
Mechanical Date
● Case: JEDEC DO-214AB molded plastic
over passivated chip
● Terminals: Solder plated, solderable per
MIL-STD-750 Method 2026
● Polarity: For uni-directional types the band
by laser denotes the cathode, which is
positive with respect to the anode under
normal TVS operation
Devices for Bidirectional Applications
● For bi-directional devices, use suffix C or CA (e.g.SMCJ10C, SMCJ10CA).
Electrical characteristics apply in both directions.
Maximum Ratings & Thermal Characteristics
(TA = 25 °C unless otherwise noted)
Symbol
VALUE
Peak pulse power dissipation
with a 10/1000µs waveform (see fig. 1)
P_PPM
1500
Peak pulse current
with a waveform (see fig. 3 , single pulse)
I_PPM
See Next Table
Peak forward surge current
8.3ms single half sine-wave uni-directional only
I_FSM
200
Typical thermal resistance, junction to ambient
Typical thermal resistance, junction to lead
Operating junction and storage temperature range
R_θJA
R_θJL
T_J T_STG
75
15
–55 to +150
UNIT
W
A
A
°C / W
°C / W
°C
http://www.trr-jx.com