DB101S Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER

DB101S-DB107S
SURFACE MOUNT BRIDGE RECTIFIERS
Features
· Glass Passivated Die Construction
· Low leakage
· Ideal for printed circuit board
· Surge overload rating-30A peak
· Designed for Surface Mount Application
· Plastic Material-UL Flammability 94V-O
Mechanical Data
· Case:Reliable low cost construction
utilizing molded plastic technique
· Terminals:Plated Leads Solderable per
MIL- STD- 202,Method208
· Polarity:As Marked on Case
· Mounting Position:Any
· Marking:Type Number
Maximum Ratings and Electrical Characteristics @TA=25℃ unless otherwise specified
Single Phase,half wave,60Hz,resistive or inductive load.For capacitive load,derate current by 20%.
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Symbol DB101S DB102S DB103S DB104S DB105S DB106S DB107S UNIT
VRRM 50 100 200 400 600 800 1000 V
VRMS
35
70 140 280 420 560 700 V
VDC
50 100 200 400 600 800 1000 V
Maximum Average forward output rectified
current @TA=40℃
I(AV)
1
A
Peak forward surge current 8.3ms single
sine-wave superimposed on rated load(JEDEC IF^SM
Method)
Maximum instantaneous forward voltage drop
per diode @1.0A
VF
Maximum DC reverse current at TA=25℃
rated DC blocking voltage per leg TA=125℃
IR
RθJA
Typical thermal resistance per leg (Note1)
RθJL
Operating junction temperature range
TJ
storage temperature range
Tstg
Note:
1.Mounted on glass epoxy PC board with 1.3mm² solder pad.
2.Mounted on aluminum substrate PC board with 1.3mm² solder pad.
3.Measured at 1.0MHz and applied reverse of 4.0V D.C.
30
1.1
5.0
500
40
15
-55 to +150
-55 to +150
A
V
uA
℃/W
℃
℃
1/2
http://www.trr-jx.com