ABS2 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Single Phase 1.0 AMP. Glass Passivated Bridge Rectifiers

ABS2 THRU ABS10
Single Phase 0.8Amp Surface Mount Glass Passivated Bridge Rectifier
Features
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
· Designed for surface mount application
· Plastic material-UL flammability 94V-O
Mechanical Data
· Case: SOPA-4, molded plastic
· Terminals: plated leads solderable per
MIL-STD-202, Method 208
· Polarity: as marked on case
· Mounting position: Any
· Marking: type number
0.165(4.2)
0.150(3.8)
ABS
0.010(0.25)
0.006(0.15)
0.268(6.8)
0.236(6.0)
0.189(4.8) ^0.268(6.8)
0.236(6.0)
0.189(4.8)
0.032(0.8)
0.024(0.6)
0.209(5.3)
0.098(2.5)
0.086(2.2)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL ABS2
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
VRM
VRWM
VDC
VRMS
200
140
Average Rectified Output Current (Note 1)@TA=30℃
(Note 2)@TA=30℃
IO
ABS4
400
280
ABS6
600
420
0.5
0.8
ABS8
800
560
ABS10 UNITS
1000
V
700
V
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
IFSM
(JEDEC Method)
Forward Voltage per element @IF=0.4A
Peak Reverse Current
@TA=25℃
At Rated DC Blocking Voltage @TA=125℃
Typical Thermal Resistance per leg _{(Note 3)}
Operating and Storage Temperature Range
VFM
IR
RθJA
RθJL
TJ,TSTG
Note:1. Mounted on glass epoxy PC board with 1.3mm² solder pad.
2. Mounted on aluminum substrate PC board with 1.3mm² solder pad.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
30
0.95
10.0
500
62.5
25
-55to+150
A
V
uA
℃/W
℃
http://www.trr-jx.com