102R18N220JV4E Datasheet, PDF (39/40 Pages) Johanson Technology Inc. – Ceramic Capacitor Solutions

Electrical Characteristics
PARAMETER
Temperature
Coefficient:
DISSIPATION
Factor:
AGING:
Insulation
Resistance:
Dielectric
Strength:
Test
Parameters:
NOTEs:
NPO
X7R
X5R
0± 30 ppm/°C
-55 to +125°C
± 15%
-55 to +125°C
± 15%
-55 to +85°C
20%
0%
-20%
-40%
-60%
-80%
-55ϒC -25ϒC
0ϒC
25ϒC 50ϒC 75ϒC 100ϒC 125ϒC
20%
0%
-20%
-40%
-60%
-80%
-55ϒC -25ϒC
0ϒC
25ϒC 50ϒC 75ϒC 100ϒC 125ϒC
20%
0%
-20%
-40%
-60%
-80%
-55ϒC -25ϒC 0ϒC
25ϒC 50ϒC 75ϒC 100ϒC 125ϒC
.001 (0.1%) max
WVDC ≥ 50 VDC, DF = 2.5% max For Vrated ≥ 50 VDC, DF = 5% max
WVDC = 25 VDC, DF = 3.0% max For Vrated ≤ 25 VDC: DF = 10% max
WVDC = 16 VDC, DF = 3.5% max
None
2.5% / decade hour
2.5 % / decade hour
1000ΩF or 100GΩ
whichever is less @ 25°C, WVDC
500ΩF or 50GΩ
whichever is less @ 25°C, WVDC
100ΩF or 10GΩ
whichever is less @ 25°C, WVDC
For Vrated = 6 - 200 VDC, DWV = 2.5 X WVDC, 25°C, 50mA max.
For Vrated = 201 - 499 VDC, DWV = 2.0 X WVDC, 25°C, 50mA max.
For Vrated = 500 - 999 VDC, DWV = 1.5 X WVDC, 25°C, 50mA max.
For Vrated = 1000+ VDC, DWV = 1.2 X WVDC, 25°C, 50mA max.
DWV = 2.5 X WVDC, 25°C, 50mA
max.
C > 100 pF; 1kHz ±50Hz;1.0±0.2
VRMS
C ≤ 100 pF 1Mhz ±50kHz; 1.0±0.2
VRMS
1kHz ±50Hz;1.0±0.2 VRMS
1kHz ±50Hz; 0.5±0.2 VRMS
Tanceram IR = 100 ΩF or 10 GΩ
Tanceram DF for Vrated ≥ 50 VDC = 5% max.
Tanceram DF for Vrated ≤ 25 VDC, DF = 10% max
Part Number Breakdown - Surface Mount ^{Part number written: 502R29W102KV3E-****-SC}
502
VOLTAGE
6R3 = 6.3 V DC
100 = 10 V DC
160 = 16 V DC
250 = 25 V DC
500 = 50 V DC
101 = 100 V DC
201 = 200 V DC
251 = 250 V DC
301 = 300 V DC
501 = 500 V DC
631 = 630 V DC
102 = 1000 V DC
202 = 2000 V DC
302 = 3000 V DC*
402 = 4000 V DC
502 = 5000 V DC*
ACJ = 250 VAC
* For Safety Caps
with -****-SC
P/N suffix only:
302 = 250VAC
[2500V Impulse]
502 = 250VAC
[5000V Impulse]
R 29
SERIES/SIZE
A_ _ = ARRAY
B_ _ = LICC
F_ _ = F-T FILTER
R_ _ = MLCC
S_ _ = MLCC
T_ _ = HI TEMP MLCC
X_ _ = X2Y
_05=0201
_07=0402
_14=0603
_15=0805
_18=1206
_41=1210
_29=1808
_30=2010
_43=1812
_44=1410
_47=2220
_49=1825
_48=2225
W
102
K
DIELECTRIC
N = NPO
W = X7R
X = X5R
CAPACITANCE
1st two digits are
significant; third
digit denotes
number of zeros,
R = decimal.
5R6 = 5.6 pF
100 = 10 pF
102 = 1,000 pF
474 = 0.47 µF
475 = 4.7 µF
106 = 10 µF
TOLERANCE
* B = ± 0.10 pF
* C = ± 0.25 pF
* D = ± 0.50 pF
*F=±1%
* G = ± 2%
* J = ± 5%
* K = ± 10%
* M = ± 20%
* Y = +50 -20%
* Z = +80 -20%
*Values < 10 pF
only
V
3
E
TERMINATION MARKING
V = Nickel Barrier 3 = Special
with 100% Tin 4 = Unmarked
Plating (Matte) 6 = EIA Code*
F = Polyterm
flexible termination
T = SnPb
*Not available
on sizes
≤ 0402
P = PdAg
PACKING
E = Embossed 7”
T = Punched 7”
U = Embossed 13”
R = Punched 13”
No code = bulk
pack
Tape specifications
conform to EIA
RS481
Not all tape styles
are available on all
parts.
-****- SC
PART NUMBER MODIFIER
Used on select parts such as Safety Certified or
for customer specific requirements.
PLEASE NOTE: Not all combinations of JDI P/Ns are valid. Please refer to the “How to Order” detail section of the specific product or contact
your Sales Representative if you need assistance.
www.johanson dielectrics.com
39