101X18W223MV4E Datasheet, PDF (2/8 Pages) Johanson Technology Inc. – X2Y® FILTER & DECOUPLING CAPACITORS

X2Y^® FILTER & DECOUPLING CAPACITORS
X2Y^® filter capacitors employ a unique, patented low inductance design featuring two balanced capacitors
that are immune to temperature, voltage and aging performance differences.
These components offer superior decoupling and EMI filtering performance, virtually eliminate parasitics,
and can replace multiple capacitors and inductors saving board space and reducing assembly costs.
ADVANTAGES
APPLICATIONS
• One device for EMI suppression or decoupling
• Replace up to 7 components with one X2Y
• Differential and common mode attenuation
• Matched capacitance line to ground, both lines
• Low inductance due to cancellation effect
• Amplifier FIlter & Decoupling
• High Speed Data Filtering
• EMC I/O Filtering
• FPGA / ASIC / µ-P Decoupling
• DDR Memory Decoupling
Circuit 1
(1 Y-Cap.)
Circuit 2
(2 Y-Caps.)
SIZE
0402 (X07)
NPO 50 50 50 50 50 50 50
X7R
50 50 50 50 50 50 16
0603 (X14)
NPO 100 100 100 100 100 50 50 50
X7R
100 100 100 100 100 100 100 50 25 25
X5R
16 10
6.3
16 10
10 10
NPO
0805 (X15)
X7R
NPO
1206 (X18
X7R
1210 (X41) X7R
1410 (X44) X7R
1812 (X43) X7R
100 100 100 100 100 100 100 50
100 100 100 100 100 100 100 100 50 50
50 25 10
VOLTAGE
RATINGS
6.3 = 6.3 VDC
10 = 10 VDC
16 = 16 VDC
25 = 25 VDC
50 = 50 VDC
100 = 100 VDC
500 = 500 VDC
100
100 100 100
100 100
16 16
10
500
100
100 100
25 16
500
100
500
100
SEE PART NUMBER LISTING TABLE ON PAGES 7 & 8 Contact factory for part combinations not shown.
Circuit 1 capacitance measured Line-to-Ground (A or B to G) Circuit 2 capacitance measured Power-to-Ground (A + B to G)
Rated voltage is from line to ground in Circuit 1, power to ground in Circuit 2 .
HOW TO ORDER X2Y^® FILTER & DECOUPLING CAPACITORS
100
X14
W
104
VOLTAGE
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
501 = 500 V
CASE SIZE
X07 = 0402
X14 = 0603
X15 = 0805
X18 = 1206
X41 = 1210
X43 = 1812
X44 = 1410
DIELECTRIC
N = NPO
W = X7R
X = X5R
CAPACITANCE
(Circuit 1)
1st two digits are
significant; third digit
denotes number of zeros.
102 = 1000 pF = 1 nF
103 = 0.01 µF = 10 nF
104 = 0.10 µF = 100 nF
M
TOLERANCE
M = ± 20%
MARKING
4 = Unmarked
P/N written: 100X14W104MV4T
V
4
T
TERMINATION
V = Ni barrier w/
100% Sn Plating
Available on select parts:
F = Polyterm^®
soft polymer termination
T = SnPb
TAPE MODIFIER
Code Tape Reel
E Embossed 7”
T
Paper
7”
Tape specs. per EIA RS481
X2Y® technology patents and registered trademark under license from X2Y ATTENUATORS, LLC
2
www.johanson dielectrics.com