5500AT07A0900 Datasheet, PDF (1/4 Pages) Johanson Technology Inc. – High Frequency Ceramic Solutions

"High Frequency Ceramic Solutions"
5.1 to 5.9 GHz, micro antenna optimized for PCB edge mount. Great for WiFi
and V2V (Vehicle to Vehicle communications)
Detail Specification: 10/30/2014
P/N 5500AT07A0900
Page 1 of 4
General Specifications
Part Number
5500AT07A0900*
Frequency (MHz)
5150 ~ 5850
5350 ~ 5900
Peak Gain (dBi typ.)
0.0 (YZ-Total)
1.0 (YZ-Total)
Average Gain (dBi typ.)
-3.0 (YZ-Total) -1.5 (YZ-Total)
Return Loss
6.0 dB max.
3.0 dB max.
Power Capacity
2W max. (CW)
Operating Temperature
Storage Temperature
-40 ~ +85 °C
-40 ~ +85 °C
Unused product (on T&R)
+5 ~ +35 °C, Humidity
recommended storage conditions
45~75%RH
Q’ty/Reel (pcs)
10,000 pcs
Storage Period
18 months max.
*AEC-Q200 qualifiable component.
Part Number Explanation
P/N
Suffix
Packaging Style
Termination
Bulk (loose)
T & R (10000pcs)
100% Tin
Suffix = S
Suffix = T
Suffix = None
Eg. 5500AT07A0900S
Eg. 5500AT07A0900T
Eg. 5500AT07A0900(T or S)
Evaluation Board
5500AT07A0900-EB1SMA (pre-tuned 50ohms with female SMA connector)
Mechanical Dimensions
In
mm
L 0.039 ± 0.004 1.00 ± 0.10
W 0.020 ± 0.004 0.50 ± 0.10
T
0.014 Max.
0.37 Max.
a 0.006 +.004/-.006 0.15 +0.1/-0.05
b 0.010 +.004/-.006 0.25 +0.1/-0.05
c 0.003 +.004/-.006 0.08 +0.1/-0.05
a
L
b
W
T
c
Terminal Configuration
No. Function No. Function
1
Feed
3
GND
2
GND
4
Feed
2
1
3
4
Recommended PCB Pattern
0ohm
4.7pF
0.5pF
0.1
0.7
0.25
3.35
1.7
•Attention: Matching circuits and component values will
be different on the client's design, depending on PCB
layout, geometry, etc. It is recommended that the
0.3
2.5
designer leave available slots for a "pi" (or shunt-series-
shunt) network. The antenna matching network values
you see here are used when antenna is mounted on
Johanson's evaluation board.
4
Units: mm
Ground
50ohm Feed line
Matching circuits _{No Ground (Yellow area)}
• Need help laying out the antenna, want us to review
the design (free!), require the Gerber files for this EVB,
or would like us to obtain the new tuning values of your
PCB (fee may apply)? Go to:
www.johansontechnology.com/component/techquestion
Solder Resist
Land
• More antenna support info at:
www.johansontechnology.com/ipcantennaservices
Johanson Technology, Inc. reserves the right to make design changes without notice.
All sales are subject to Johanson Technology, Inc. terms and conditions.
www.johansontechnology.com
4001 Calle Tecate • Camarillo, CA 93012 • TEL [phone] FAX [phone]
Ver 1.0
2014 Johanson Technology, Inc. All Rights Reserved