0500LP15A500 Datasheet, PDF (1/2 Pages) Johanson Technology Inc. – 500 MHz Low Pass Filter

"PRELIMINARY"
500 MHz Low Pass Filter
Detail Specification: 06/02/05
P/N 0500LP15A500
Page 1 of 2
General Specifications
Part Number
0500LP15A500
Impedance
50 Ω
Frequency (MHz)
0 - 500
Operating Temperature
-40 to +85°C
Insertion Loss
0.7 dB max.
Storage Temperature
-40 to +85°C
Return Loss
9.5 dB min.
Reel Quanity
4,000
Attenuation (min.)
9 dB @ 824 - 960 Mhz
Input Power
1 Watt max.
Attenuation (min.)
25 dB @ 1.71 - 1.99 Mhz
Attenuation (min.)
25 dB @ 2.40 - 4.00 Mhz
Terminal Configuration
No. Function
1
GND
Mechanical Dimensions
2
NC
3
GND
In
mm
4
OUT
L 0.079 ± 0.004
W 0.049 ± 0.004
T 0.037 ± 0.004
a 0.012 ± 0.004
g 0.008 ± 0.004
b 0.012 ^+.004/-.008
g 0.014 ± 0.004
p 0.026 ± 0.002
2.00 ± 0.10 _a
1.25 ± 0.10
0.95 ± 0.10
0.30 ± 0.10
0.20 ± 0.10
0.30 +0.1/-0.2
0.35 ± 0.10
0.65 ± 0.05
W
c
L
a
p
5
GND
6
NC
7
GND
8
IN
3
2
1
T
4
8
g
b
567
Mounting Considerations
Mount these devices with brown mark facing up.
* Line width should be designed to provide 50 ohm impedance, depending on PCB material and thickness
Units: mm
Land
T
Solder Resist
b
No Pattern
Solder Resist
Through-hole (φ 0.35)
Johanson Technology, Inc. reserves the right to make design changes without notice.
All sales are subject to Johanson Technology, Inc. terms and conditions.
www.johansontechnology.com
931 Via Alondra • Camarillo, CA 93012 • TEL [phone] FAX [phone]
2003 Johanson Technology, Inc. All Rights Reserved