ZC-1072-10 Datasheet, PDF (1/1 Pages) JMK Inc. – Operating voltage = 125 v~ Operating current (max) = 10 amperes

Operating voltage = 125 v~
Operating current (max) = 10 amperes
Frequency = dc - 400 Hz
Temperature range (storage) = -40 to 85 c
Temperature range (operating) = -20 to 60 c
Diel. withstanding voltage (ph - case) = 1000 v~
Diel. withstanding voltage (ph - ph) = 1000 vdc
Leakage current @ 125 v~, 60 hz = 0.6 ma max
Discharge voltage after 60 sec = 34 V max
Order p/n: ZC-1072-10
ZC-1072-10
This filter provides very good common mode
and differential mode insertion loss for 10
amp single phase systems. This filter was
designed for military systems with require-
ments to meet the MIL-STD-461 emissions
specification. If a higher operating tempera-
ture is required contact the factory.
We can probably adjust the filter to meet your
requirements.
The standard construction is more than
adequate for most installation environments.
Should your application require operation in a
more severe environment JMK's engineering
staff can modify the mechanical construction
to meet the most severe design criteria.
Higher current models are also available
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 7785310729 Fax: [phone]