MM-1315-100 Datasheet, PDF (1/1 Pages) JMK Inc. – The Mm-1315-100 filter is designed for use with large computer or motor installations where heavy current is drawn continuously.

MM-1315-100
Operating Voltage _____________ 250/480 V~,
50 / 60 Hz
Operating Voltage _____________ 125/208 V~,
50 – 400 Hz
Operating Current ____________ 100 A / Phase
Temperature Range __________ -20 TO 50 Deg. C
Diel. Withstand (L-CASE) _______ 1500 V~
FOR 1 MIN.
Diel. Withstand (L-L) ___________ 2200 Vdc
For 1 Min.
Leakage Current ______________18 ma (max)
@ 250 V~, 60 Hz
Resid.Volt after 3.0 second _____ 20 V Max.
Max. Cap. each line to case _____0.10 uF
Order P/N: MM-1315-100
LINE
1
2
3
GRD
LOAD
1
2
3
GRD
The Mm-1315-100 filter is designed for use with large
computer or motor installations where heavy current is
drawn continuously. This filter can handle large in-rush
current typical of modern power supplies.
When data lines or power is shared with other systems
the ground coil helps breakup ground loops which can
cause system errors and also increase conducted RF
18.00
17.00
16.00
3.00
1.50
.27 x .56 SLOT (4 PL)
3.00
2.00
1.15
1.15
2.30
0.70
1/4 - 20 THR'D TER
(10 PL)
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Ltd Dumbarton G82 2TS Scotland UK PH: 44-(0) 1389-751841 FX: 44-(0) 1389-751841