KK-1328-40 Datasheet, PDF (1/1 Pages) JMK Inc. – This filter delivers high common mode and differential mode insertion loss for DC Power Systems.

This filter delivers high common mode and differential
mode insertion loss for DC Power Systems.
The filter can be used for either commercial applications
or for applications involving MIL-STD-461D, E, or F.
If the older MIL-STD– 461C is required, the circuit can be
re-arranged to accommodate the “C” version.
If severe shock and vibration is a requirement, contact
our engineering department to discuss any possible
mechanical modifications.
Operating Voltage = ____________________0 to 63Vdc
Operating Current = ______________________ 40 Amp
Operating Temperature =
40 AMP= _____________________ (-20 - 50ºC)
37 AMP= _____________________ (-20 - 55ºC)
35 AMP= _____________________ (-20 - 60ºC)
30 AMP= _____________________ (-20 - 67ºC)
27 AMP= _____________________ (-20 - 72ºC)
Storage Temperature = _______________-40ºC - 100ºC
Diel. Withstanding (L-Case) = _____________ 1000 Vdc
Diel. Withstanding (L-L) = ________________ 1000 Vdc
Max Residual Volt after 1 sec = _____________34 Volts
Weight = _________________________________1.9 lb
Max Torque on Terminals = _________________25 in.lb
Calculated MTBF = _____________7,386,888 Hrs @ 30°C GB
Failure Rate = _______________________________0.135375
KK-1328-40
INSERTION LOSS vs. FREQUENCY
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 7785310729 Fax: [phone]