KK-0902-20-30 Datasheet, PDF (1/1 Pages) JMK Inc. – Operating Voltage = 250/480 Vac 3 PH Wye Operating Current Max= 20 & 30 amps

Operating Voltage = 250/480 Vac 3 PH Wye
Operating Current Max= 20 & 30 amps
Operating Frequency = 50 - 60Hz
Operating Temperature = -20 to +50oC
Diel Withstand ( L to Case)= 1500V~for 1 Min.
Diel Withstand ( L to L )= 1500Vdc for 1 Min.
Leakage current @ 250V~50Hz= 1.8 mA
Max Residual Voltage after 5 secs = 34 Volts Max
Agency Approvals = UL ( Pending)
Ordering Information:
20 Amps 10-32 Threaded Terminals KK-0902-20
30 Amps 10-32 Threaded Terminals KK-0902-30
KK-0902-20-30
The 902 filter is a three phase filter designed to operate with
computers, motors, power distribution systems or any system
using three phase power.
This filter is designed to be used on 3 phase wye power systems
but can be used in a delta configuration by not connecting to the
neutral (N) terminal of the filter. The ground coil is designed to
eliminate ground loops caused by inter-system connections.
The package features threaded studs for mounting in a "through
bulkhead" manner providing the ultimate in RF noise suppres-
sion. The filter can also be purchased without the ground coil
for use with stand alone systems.
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 7785310729 Fax: [phone]