|
HH-1199-6D Datasheet, PDF (1/1 Pages) JMK Inc. – This filter was designed especially for power supply modules with power factor correction. | |||
|
This filter was designed especially for power
supply modules with power factor correction.
This filter works well on systems with require-
ments to meet the European EN55022 emissions
specification or for systems required to meet the
FCC conducted emissions standards.
Operating Voltage: 125 / 250 v~
Operating Current (Max): 6.0 AMP
Frequency: 50/60 Hz
Temperature Range (Storage): -40 to 85C
Temperature Range (Operating): -40 TO 50C
Diel. Withstanding Voltage (Lineâcase): 1500
Vac
Diel. Withstanding Voltage (lineâLine): 1500
Vdc
Leakage Current @250 Vac, 60 Hz: 2.5 ma
Max.
Residual Voltage after 1.0 sec: 34 V Max.
Order p/n: HH-1199-6D
Note: This filter has a reduced height of 0.7
inch for tight
fitting applications. The pin height is also 0.19
inch.
HH-1199-6D
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: info@jmkfilters.com
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884
|