HH-1055-6.3 Datasheet, PDF (1/1 Pages) JMK Inc. – Operating voltage = 85 to 250 V~ Operating current = 6.3 Amp

JMK. Inc
Operating voltage = 85 to 250 V~
Operating current = 6.3 Amp
Operating frequency = 50/60 Hz
Oper. temperature (-6.3) = -20 to 50^o C
(see derating chart )
Oper. temperature (-6.3B) = -40 to 50^o C
(see derating chart )
Diel. withstanding (line - case) = 1500 Vac
Diel. withstanding (line - line) = 1500 Vdc
Leakage current = 1.0 ma at 220 Vac, 50 Hz
Max residual voltage after 1 sec. = 34 Volts
Agency approvals = UL, CSA, TUV
Designed with Vicor for use on their HAM module
Order P/N : HH-1055-6.3
HH-1055-6.3B (Wide temp range)
HH-1055-6.3
HH-1055-6.3B
LINE
LOAD
410 V
4-40 INSERT
.25 DP (4 PL)
4.60
0.25
2.50
0.30
2.40 2.00
1.80
0.20
0.50
1.46
0.50
2.80
.080 DIA PIN (6 PL)
0.94
0.06
0.13 ±0.02
This filter has been designed in cooperation with Vicor
engineers to work with the Vicor Harmonic Attenuator
Module (HAM). The filter provides the correct attenua-
tion for the HAM to meet the European an US con-
ducted emissions requirements.
The filter also has the transient protection required to
protect the front end of the HAM from damage due to
transients.
The standard model will meet most applications. If low
temperatures (-40^oC) are required along with shock and
vibration requirements we recommend the HH-1055-
6.3B model
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 778 531-0729 FX: 44-(0) 141 589-1884