FF-2142-6.3 Datasheet, PDF (1/2 Pages) JMK Inc. – FF-2142-6.3

This filter has been designed to operate with the VICOR
(HAM) Harmonic Attenuator Module.
The combination is designed to meet the conducted
emissions requirements of EN 55015.
The filter will also function very well with most other fixed
frequency switching power supplies.
Order P/N: FF-2142-6.3
Operating Voltage = _________________ DC—250 Vac
Operating Current (Max)= ____________________ 6.3A
Frequency = _________________ 50/60 HZ @ 250 Vac
= ___________________ 400 Hz @ 120 Vac
Temp. Range (Storage) = ______________-25°—100°C
Temp. Range (Operating) (-13)@ 13.0 A = _ -25°—60ºC
(See temp graph)
Diel. Withstanding (Ph—Case) = __ 1500 Vac; For 1 Min
Diel. Withstanding (Ph—Ph) = ____ 1500 Vdc; For 1 Min
Leakage Current @ 250 Vac, 60 HZ = ____ 0.5 MA max.
Discharge Voltage after 3 sec = ___________ 20 V max.
Weight = _______________________________ 2.5 Lbs
DCR = _________________________0.85 Ohm; ea. leg
FF-2142-6.3
INSERTION LOSS vs. FREQUENCY
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 7785310729 Fax: [phone]