EF-0926-20 Datasheet, PDF (1/1 Pages) JMK Inc. – The 926 filter is a compact, single phase, high current device with very good common mode and differential mode insertion loss.

The 926 filter is a compact, single phase, high
current device with very good common mode
and differential mode insertion loss.
It is useful in power control sections where the
ground coil will help eliminate system ground
loop noise.
The package features the 16 amp IEC connector
which facilitates the use of a detachable cord
set.
The "thru" bulkhead mounting provides the ulti-
mate in RF noise suppression.
Other configurations are also available.
Operating Voltage = 115 / 250 V~
Operating Current = 20 A / 115 V~, 16 A / 250
V~
Operating Frequency = 50 / 60 Hz
Temperature Range = -20 To 50 Deg. C
Diel. Withstnd (L -Case) = 1500 V~ For 1 Min.
Diel. Withstnd (L -L) = 1500 Vdc For 1 Min.
Leakage Current = 1.5Ma At 250 V~, 60 Hz
Discharge Volts After 1 Sec = 34 V Max.
Ordering Information
With Ring Terminals: EF-0926-20
Without Ring Terminals: EF-0926-20S
EF-0926-20
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 7785310729 Fax: [phone]