AA-0440-6 Datasheet, PDF (1/1 Pages) JMK Inc. – This filter series is available with current ratings of 3,6,8, and 10 amps

This filter series is available with current rat-
ings of 3,6,8, and 10 amps. The filters are also
produced with configurations featuring 1/4
tab terminals, AWG #18 leads, or with an IEC
inlet connector.
The design is intended for systems which
have requirements to meet the following
requirements:
• FCC
• EN55022 or other European requirements
• MIL-STD-461D or E.
Other configurations may also be available.
Check with our engineering department if you
don’t find what you need.
Operating Voltage = 115/250 V~
Operating Current = 6 Amps
Operating Frequency = 50 / 60 Hz
Temperature Range = -20 TO 50 Deg. C
Diel. Withstand (L-CASE) = 1500 V~ FOR 1 MIN.
Diel. Withstand (L-L) = 1500 Vdc For 1 Min.
Leakage Current = 0.5 ma @ 250 V~, 60 Hz
Discharge Volt after 1.0 second = 10 V Max.
Agency approvals = UL
Order P/N: AA-0440-6
AA-0440-6
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115
email: [e-mail]
JMK Inc Glasgow G13 1DN Scotland UK PH: 44-(0) 7785310729 Fax: [phone]